Coating and Insulation

Through our website we provide to our clients a wide range of books and Procedures that covers the coating & insulation in oil and gas industry and defines the proper inspection method to identify defects.

our website also provides a huge amount of international, national & companies specification and standards that describes and covers all types of coating and Insulation.

Type

Format

Title

Edition

Description

Author

Priority

Availability

P

Procedure For Internal Coating survey

2017

This procedure covers the inspection methodology used to identify defects, which may threaten the integrity of the internal protective coating system, substrate protection and vulnerability of the offshore facility. Recommendations for repair or refurbishment are in accordance with current QP Specification and relevant International Standards, Codes of Practice, Specifications and Regulations.

ASME

Upon Request

P

Procedure for Coating trial inspection

2017

This procedure covers the inspection methodology used to assess and evaluate the performance of proposed coating systems intended to provide corrosion protection at offshore production/storage facilities. Coatings under test will be subject to one or more of the following types of trial: Atmospheric Exposure Testing (natural weathering), Field Exposure Testing (at particular areas of the Corporations plant), Controlled Environment Test Cabinet (KTA Envirotest), Internal Process Conditions (panels within tanks vessels during operating conditions).

AWS

Upon Request

P

Procedure for Managing Corrosion Under Insulation (CUI)

The purpose of this document is to manage the risk of CUI by combination of effective inspection and mitigation measures. This document provides requirements and supporting elements for inspection and mitigation of corrosion under insulation (CUI) on carbon and low alloy steels

AWS

Upon Request

P

Performance Qualification of Coating personnel

2015

This Saudi Aramco Engineering Procedure (SAEP) specifies the minimum mandatory qualification and certification requirements for personnel associated with protective coatings activities. This SAEP applies to all contractors, working under Saudi Aramco Plant Maintenance and Projects Construction Departments, and other personnel associated to protective coatings work. This SAEP is applicable to all coating personnel within-Kingdom performing coating related activities for Saudi Aramco, in shop or field.

N/A

Free

P

Procedure for Internal Coating Survey

2017

This procedure covers the inspection methodology used to identify defects, which may threaten the integrity of the internal protective coating system, substrate protection and vulnerability of the offshore facility. Recommendations for repair or refurbishment are in accordance with current QP Specification and relevant International Standards, Codes of Practice, Specifications and Regulations.

BS

Upon Request

P

Procedure for Thermal Insulation Survey

2017

This procedure covers the inspection methodology used to identify, analyze and record defects in the applied insulation system, which would reduce the efficiency of process operations. The procedure will also be used to make recommendations for corrective, remedial and preventive actions to restore the desired thermal properties. This procedure is applicable for inspections of thermal insulation of pre and post installation on piping works and/or equipment.

BS

Upon Request

P

Procedure Stage Coating

2017

This procedure covers the inspection methodology used to ensure that coating application in accordance to Applicable Specification and to eliminate any defects in the applied coating system, which would reduce the efficiency in protection against corrosion. The procedure will also be used to make recommendations for corrective, remedial and preventive actions to ensure the specified corrosion protection is achieved. This procedure will be applicable for inspections during the execution of coating refurbishment

BS

Upon Request

P

Procedure Coating Trial

2017

This procedure covers the inspection methodology used to assess and evaluate the performance of proposed coating systems intended to provide corrosion protection at offshore locations facilities. Coatings under test will be subject to one or more of the following types of trial: Atmospheric Exposure Testing (natural weathering), Field Exposure Testing (at particular areas of the Corporations plant). Controlled Environment Test Cabinet (KTA Envirotest). Internal Process Conditions (panels within tanks vessels during operating conditions).

G. Golañski

Upon Request

P

Procedure Annual Coating Survey

2017

This procedure covers the inspection methodology used to identify, analyze and record defects in the applied coating system, which would reduce the efficiency in protection against corrosion. This procedure shall also be used to provide recommendations for corrective, remedial and preventive actions to restore the specified corrosion protection.

K H Prabhudev

Upon Request

P

Procedure Coating Guarantee

2017

This procedure covers the inspection methodology used to identify, analyze and record defects in the applied coating system, which would reduce the efficiency in protection against corrosion. The procedure will also be used to make recommendations for corrective, remedial and preventive actions to restore the specified corrosion protection. This procedure is applicable for inspections of coating refurbishment work prior to the termination of the contract guarantee period.

AWS

Upon Request

GL

ANS Guidance note for Inspection & maintenance Marine coating systems

2007

The IMO Performance Standards for Protective Coatings (PSPC) are intended to delay the onset of corrosion of the structure of dedicated seawater ballast tanks in all types of ships and the double-side skin spaces of bulk carriers. The standards represent the latest in the line of many regulatory actions taken to enhance vessel longevity and thereby enhance safety. More comprehensive vessel inspections by national maritime administrations and concerns by charterers over the condition of vessels with respect to corrosion have contributed to an increased awareness of the contribution made by coatings towards maintaining structural integrity.

N/A

Free

GL

SSPC - Guide 6 Guide for Containing Debris Generated During Paint Removal Operations

2003

This guide describes methods of paint removal, containment systems, and procedures for minimizing or preventing emissions from escaping the work area, and procedures for assessing the adequacy of the controls over emissions.

N/A

Free

S

 

This DEP specifies requirements and gives recommendations for the acoustic insulation of pipes, valves and flanges to reduce the noise emitted by these items.

N/A

Free

S

ASTM A 90-A 90M Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc o

2001

This test method covers procedures for determining the weight [mass] of coating on iron or steel sheet, wire, and other articles in which the coating is zinc or a zinc alloy, such as zinc-5 % aluminum (including zinc-5 % aluminum and zinc-5 % aluminum-0.1 % magnesium) or 55 % aluminum-zinc. In the body of this test method, reference to zinc coating shall be interpreted to also include zinc alloy coating except where specifically stated otherwise. The final results determined by this test method shall be expressed in inch-pound units or SI units, depending on the units used in the material specification to which the results are to be compared. Certain portions of the procedure involving determination of specimen weight [mass] have traditionally been performed in SI units, and corresponding inch-pound units are not included. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazards statements see 5.1.

N/A

Free

S

ASTM A 123-A 123M Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Procedure

2002

This specification covers the requirements for zinc coating (galvanizing) by the hot-dip process on iron and steel products made from rolled pressed and forged shapes, castings, plates, bars, and strips. This specification covers both unfabricated products and fabricated products, for example, assembled steel products, structural steel fabrications, large tubes already bent or welded before galvanizing, and wire work fabricated from uncoated steel wire. This specification also covers steel forgings and iron castings incorporated into pieces fabricated before galvanizing or which are too large to be centrifuged (or otherwise handled to remove excess galvanizing bath metal).

N/A

Free

S

ASTM A 153-A 153M Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware

This specification covers zinc coatings applied by the hot-dip process on iron and steel hardware. The hot-dip galvanizing process consists of parts being immersed in molten zinc for a sufficient time to allow a metallurgical reaction between iron from the steel surface and the molten zinc, resulting in the formation of Zn/Fe alloy layers bonding the coating to the steel surface. This specification is intended to be applicable to hardware items that are centrifuged or otherwise handled to remove excess galvanizing bath metal (free zinc). Coating thickness grade requirements reflect this.

Dr. Hamdy A-E YOUSEF

Upon Request

S

ASTM A 591-A591M Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Wei

1998

This specification covers zinc coatings produced by electro-deposition for light coating weight [mass] applications on steel sheet. This product is available in four zinc-coating designations which are listed in Table 1. For electrolytic zinc-coated steel sheet with coating masses heavier than described in this specification, see Specification A 879

TWI

Upon Request

S

ASTM A 780 Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings

2001

This practice describes methods that may be used to repair damaged hot-dip galvanized coatings on hardware, structural shapes, and other products fabricated prior to hot-dip galvanizing, and uncoated areas remaining after initial hot-dip galvanizing. The damage may be the result of welding or cutting (flame), in which case the coating will be damaged predominantly by burning. This practice can also be used to repair hot-dip galvanized coatings damaged by excessively rough handling during shipping or erection. Requirements concerning the renovation of uncoated areas remaining after initial hot-dip galvanizing are contained within the applicable material specification.

Fowles RJ (SAIW) and Blake SE (AWC)

Upon Request

S

ASTM A 972 - A972M Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles

2000

This test method covers the determination of the loss in mass by evaporation of lubricating greases and oils for applications where evaporation loss is a factor. Evaporation loss data can be obtained at any temperature in the range from 100 °C to 150 °C (210 °F to 300 °F).

ISO

Upon Request

S

ASTM A950-A950M Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet

1999

This specification covers structural steel H-piles and sheet piling with protective fusion-bonded epoxy coating applied by the electrostatic spray, flocking, or fluidized bed process.

ISO

Upon Request

S

ASTM D 2197 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion

2002

This test method covers the determination of the adhesion of organic coatings such as paint, varnish, and lacquer when applied to smooth, flat (planar) panel surfaces. The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

R. Scott Funderburk

Upon Request

S

ASTM D 3843 Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facility

2000

These test methods cover the determination of the weight per unit area of waterside deposits on heat-transfer surfaces of steam generator tubes.

R. Scott Funderburk

Upon Request

S

ASTM D 3925 Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings

2002

This practice describes methods of taking representative samples of fluid paint or pigmented coating products from containers of any type. Two ISO standards, ISO 1513 and ISO 15528, cover the details and equipment for sampling of liquid paints and associated materials in much greater detail than this standard. The reader is referred to those standards for more information. The sampling of dry powder paints, clear coatings, mixed solvents, and nonpigmented materials of any type is not covered in this procedure.

N/A

Free

S

ASTM D 4228 Standard Practice for Qualification of Coating Applicators for Application of Coatings to St

1999

This practice provides a standard qualifying method for coating applicators to verify their proficiency and ability to attain the required quality for application of specified coatings to steel surfaces including those in safety-related areas in a nuclear facility. Variations or simplifications of the practice set forth herein may be appropriate for special coating work such as maintenance or qualifications of equipment suppliers shop personnel. It is not the intent of this practice to mandate a singular basis for all qualifications.

Terry Khaled, Ph.D.

Upon Request

S

ASTM D 4286 Standard Practice for Determining Coating Contractor Qualifications for Nuclear Powered Elec

1999

This practice provides a criteria guide and procedural method to assist utility owners, architects, engineers, constructors, and other selection agencies in determining the overall qualifications of a coating contractor to execute coating work for the primary containment and other safety-related facilities of light-water nuclear power plants. The qualification criteria and requirements address the essential basic capability of a contractor to execute nuclear coating work. Obviously, the specific capability to execute those requirements unique to a given project must also be carefully considered. The evaluation procedure contained in this practice is designed to be adaptive to this detailed final qualification process. Variation or simplification of the practice is appropriate for non safety-related areas of nuclear power plants, fossil fueled facilities, and other industrial projects.

N/A

Upon Request

S

ASTM D 5162 Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on

2001

Tempil

Upon Request

S

ASTM D 6206 Standard Practice for Sampling of Coating Films

1999

Cole Davis & Gregory W. Brown, PhD

Upon Request

S

ASTM D16 Standard Terminology for Paint, Related Coatings, Materials, and Applications

2000

George E. Totten

Upon Request

S

ASTM D6189 Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings

1998

George E. Totten

Upon Request

S

ASTM D6386 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product

1999

N/A

Free

S

ASTM F 941 Standard Practice for Inspection of Marine Surface Preparation and Coating Application

2000

N/A

Free

S

ASTM F 2217 Standard Practice for Coating-Adhesive Weight Determination

2001

EWF

Upon Request

S

ASTM F718 Standard for Shipbuilders and Marine Paints and Coatings Product &Procedure Data Sheet

2000

Inspectioneer

Upon Request

S

ASTM F940 Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (P

2000

TIG

Upon Request

S

ASTM G 12 Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on

1938

A M Barns

Upon Request

S

ASTM G 62 Standard Test Methods for Holiday Detection in Pipeline Coatings

1998

P Bastid

Upon Request

S

BS  Part B5 Preparation of Acid Extracts from Liquid Paints of Coating Powders

1986

TWI

Upon Request

S

BS 3424 Part 25 Method for Determination of the Coating Thickness and Thickness of Any Expanded Layer

1993

TWI

Upon Request

S

BS 3900 - Part A17 Coating of Test Panels at a Spreading Rate

1986

Joseph W. MCEnemey & Pingsha Dong

Upon Request

S

BS 3900 - Part B5 Preparation of Acid Extracts from Liquid Paints of Coating Powders

1986

S

BS 3900 - Part J3 Determination of Gel Time of Coating Powders

1995

S

BS 3900 - Part J4 Determination of the Storage Stability of Coating Powders

1994

S

BS 3900 - Part J5 Determination of Loss of Mass of Coating Powders on Heating

1992

S

BS 3900 - Part J6 Determination of Density of Coating Powders by Gas Comparison Pyknometer

1993

S

BS 3900 - Part J7 Determination of Density of Coating Powders by Liquid Displacement Pyknometer

1993

S

BS 3900 - Part J8 Calculation of Lower Explosion Limit of Coating Powders

1993

S

BS 3900 - Part J9 Determination of Flow Properties of a Coating Powder-Air Mixture

1993

S

BS 3900 - Part J10 Determination of Deposition efficiency  of Coating Powders

1998

S

BS 3900 - Part J11 Determination of Flow of Coating Powders

1997

S

BS 3900 - Part J12 Determination of Compatibility of Coating Powders

1998

S

BS 3900 - Part J13 Testing of Coating Powders - Part J13- Particle Size Analysis by Laser Diffraction

2001

S

BS 3900 - Part P9 Sampling

2000

S

BS 3900 -A-10 Determination of Percentage Volume of Non-Volatile Matter by Measurement of the Density of

1996

S

BS 3900 Part F10 Determination of Resistance to Cathodic disbonding of Coatings for Use in Marine Enviro

1985

S

BS 3900 Part J1 Sampling of Coating Powders

1993

S

BS 3900 Part J2 Determination of Particle Size Distribution of Coating Powders by Sieving

1993

S

BS 4147 Bitumen-Based Hot- Applied Coating Material for Protecting Iron and Steel, Including Suitable Procedure

1980

S

BS 4164 Specification for coal-tar-based hot-applied coating materials for protecting iron and steel, in

2002

S

BS 4479 Part 4 Design of Articles That Are to Be Coated Part 4

1990

S

BS 4508 Part 1 Thermally Insulated Under Ground Piping Systems Steel Cases Systems with Air Gap

1986

S

BS 5411 - Part 4 Coulometric Method for the Measurement of Coating Thickness

1986

S

BS 5411 - Part 8 Measurement of Coating Thickness of Metallic Coatings- X-Ray Spectrometric Methods

1991

S

BS 5411 - Part 9 Measurement of Coating Thickness of Electrodeposited Nickel Coatings on Magnetic and No

1984

S

BS 5411 - Part 11 Measurement of Coating Thickness of Non-Magnetic Metallic and Vitreous or Porcelain En

1984

S

BS 5411 - Part 14 Gravimetric Method for Determination of Coating Mass per Unit Area of Conversion Coating

1982

S

BS 5411 Part 3 Eddy Current Method for Measurement of Coating Thickness of Non-Conductive Coatings on No

1984

S

BS 5411 Part 7 Profilometric Method for Measurement of Coating Thickness

1981

S

BS 5493 1977 And 1 Code of Practice for Protective Coating or Iron and Steel Structures Against Corrosion

1977

S

BS 5493 1977 And 2 Code of Practice for Protective Coating of Iron and Steel Structures Against Corrosion

1977

S

BS 6742 Part 2  Selection, Installation and Use of Hand-Held Paint Spray Guns  and Associated Apparatus

1987

S

BS 7572 Thermally Insulated Underground Piping Systems

1992

S

BS EN ISO 4618-1 Terms and definitions for Coating Materials - Part 1- General Terms

1998

S

BS EN ISO 4618-2 Terms and Definitions for Coating Materials - Part 2- Special Terms Relating to Paint C

2000

S

BS EN ISO 4618-3 Terms and Definitions for Coating Materials - Part 3- Surface Preparation and Methods o

2000

S

BS EN ISO 4628-6 Paints and varnishes Evaluation of degradation of paint coatings Designation of intensi

2001

S

BS M 40 Methods for Measuring Coating Thickness by Non-Destructive Testing

1972

S

BS MA 94 Thermal Insulation for Marine Piping Systems

1981

S

Coatings for Corrosion Protection Offshore

S

D374M-13 Standard Test Methods for Thickness of Solid Electrical Insulation (Metric)

2013

S

D470-13 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable

2013

S

D495-14 Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation

2014

S

D619-14 Standard Test Methods for Vulcanized Fiber Used for Electrical Insulation

2014

S

D668-12 Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation

2012

S

D710-13 Standard Specification for Vulcanized Fiber Sheets, Rods, and Tubes Used for Electrical Insulation

2013

S

D876-13 Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation

2013

S

D902-12 Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation

2012

S

D1039-94(2010) Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation

2010

S

D1305-99(2009) Standard Specification for Electrical Insulating Paper and Paperboard—Sulfate (Kraft) Layer Type

2009

S

D1351-14 Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable

2014

S

D1458-13 Standard Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation

2013

S

D1677-02(2011) Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation

2011

S

D1711-14a Standard Terminology Relating to Electrical Insulation

2014

S

D1711-15 Standard Terminology Relating to Electrical Insulation

S

D1830-99(2012) Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical

2012

S

D2132-12 Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials

2014

S

D2148-13 Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation

2008

S

D2219-11 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation

2011

S

D2220-11 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation

2011

S

D2275-14 Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected

2014

S

D2301-10 Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape

S

D2303-13 Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials

2010

S

D2304-10 Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials

2010

S

D2413-99(2009) Standard Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric

2009

S

D2484-06(2012)e1 Standard Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape

2012

S

D2519-07(2012) Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test

2012

S

D2520-13 Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating

2013

S

D2633-13a Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable

2013

S

D2655-12 Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V

2012

S

D2656-13 Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V

2013

S

D2686-06(2012) Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape

2012

S

D2754-10 Standard Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape

2010

S

D2756-07(2012) Standard Test Method for Weight Loss of Electrical Insulating Varnishes

2012

S

D2802-14 Standard Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable

2010

S

D2902-00(2013)e1 Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation

2013

S

D2903-11 Standard Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation

2011

S

D3004-08(2013) Standard Specification for Crosslinked

2013

S

D3005-10 Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape

S

D3006-10 Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape

2010

S

D3032-10 Standard Test Methods for Hookup Wire Insulation

2010

S

D3144-00(2013)e1 Standard Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation

2013

S

D3145-13 Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method

2013

S

D3149-06(2013) Standard Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation

2013

S

D3150-11 Standard Specification for Crosslinked and Non crosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation

2011

S

D3251-04(2013) Standard Test Method for Thermal Endu

2013

S

D3353-10 Standard Test Methods for Fibrous-Insulated Magnet Wire

2010

S

D3376-14 Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation

2014

S

D3394-94(2009) Standard Test Methods for Sampling and Testing Electrical Insulating Board

2009

S

D3426-97(2012) Standard Test Method for Dielectric

2012

S

D3554-07(2013) Standard Specification for Track-Resis

2013

S

D3555-07(2013) Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90 °C Operation

2013

S

D3636-13ae1 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials

2013

S

D3755-14 Standard Test Method for Dielectric Breakdown

2014

S

D3850-12 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)

2012

S

D3955-13 Standard Specification for Electrical Insulating Varnishes

2013

S

D4063-99(2016)

2016

S

D4245-08(2013) Standard Specification for

2013

S

D4246-14 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Operation

2014

S

D4325-13 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes

2013

S

D4388-13 Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes

2013

S

D4565-15 Standard Test Methods for Physical

2015

S

D4566-14 Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable

2014

S

D4967-99(2013) Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables

2013

S

D5470-12 Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials

2012

S

D5637-05(2012) Standard Test Method for Moisture Resistance of Electrical Insulating Varnishes

2012

S

D5638-14 Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes

2014

S

D6096-11(2016)

2016

S

D6096-11 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90°C Operation

2011

S

D6343-14 Standard Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications

2014

S

D7894D7894M-14 Standard Test Method for Thermal Endurance of Coating Powders Used for Integral Bus Bar Insulation Systems

2014

S

D7895D7895M-14 Standard Test Method for Thermal Endurance of Coating Powders Used for Powder Coating Insulation Systems

2014

S

ISO 4618-2 Special Terms Relating to Paint Characteristics and Properties

1999

S

ISO 4628-1General Principles and Rating Schemes

1982

S

NACE 80200 Preparation of Protective Coating Specifications for Atmospheric Service SSPC TR-4

2000

S

NACE RP0281-98 Method for Conducting Coating (Paint) Panel Evaluation Testing in Atmospheric Exposures

1998

S

NACE RP0295-95 Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars

1995

S

NACE RP0297-97 Maintenance Painting of Electrical Substation Apparatus Including Flow Coating of Transformation

1997

S

NACE RP0302-2002 Selection and Application of a Coating System to Interior Surfaces of New and Used Rail

2002

S

NACE RP0375-99 Wax Coating Systems for Underground Piping Systems

1999

S

NACE RP0394-2002 Application, Performance, and Quality Control of Plant-Applied, Fusion-Bonded Epoxy Ext

2002

S

NACE RP0395-99 Fusion-Bonded Epoxy Coating of Steel Reinforcing Bars

1999

S

NACE RP0398-98 Recommendations for Training and Qualifying Personnel as Railcar Coating and Lining Inspection

1998

S

NACE RP0399-99 Plant Applied, External Coal Tar Enamel Pipe Coating Systems= Application, Performance, a

1999

S

NACE RP0402-2002 Field-Applied Fusion-Bonded Epoxy (FBE) Pipe Coating Systems for Girth Weld Joints

2002

S

NACE RP0495-2003 Guidelines for Qualifying Personnel as Abrasive Blasters and Coating and Lining Applica

2003

S

NACE RP0592-2001 Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in

2001

S

NACE RP0602-2002 Field-Applied Coal Tar Enamel Pipe Coating Systems= Application, Performance, and Qualification

2002

S

NACE RP0692-2003 Application of a Coating System to Exterior Surfaces of Steel Rail Cars

2003

S

NACE SP0198 - Control of Corrosion Under Thermal Insulation and Fireproofing Materials

2016

S

NACE TM0102-2002 Measurement of Protective Coating Electrical Conductance on Underground Pipelines

2002

S

SSPC - PA COM Commentary on Paint Application

2000

S

SSPC - PA1 Shop, Field, and Maintenance Painting of Steel

2000

S

SSPC - Paint 5 Zinc Dust, Zinc Oxide and Phenolic Varnish Paint

2000

S

SSPC - Paint 8 Aluminum Vinyl Paint

2000

S

SSPC - Paint 9 White (or Colored) Vinyl Paint

2000

S

SSPC - Paint 11 Red Iron Oxide, Zinc Chromate, Raw Linseed Oil and Alkyd Primer

2000

S

SSPC - Paint 12 Cold-Applied Asphalt Mastic (Extra Thick Film)

2000

S

SSPC - Paint 15 Steel Joist Shop Primer

2000

S

SSPC - Paint 16 Coal Tar Epoxy-Polyamide Black

2000

S

SSPC - Paint 17 Chlorinated Rubber Inhibitive Primer

2000

S

SSPC - Paint 18 Chlorinated Rubber Intermediate Coat Paint

2000

S

SSPC - Paint 19 Chlorinated Rubber Topcoat Paint

2000

S

SSPC - Paint 20 Zinc-Rich Primers (Type I, norganic, and Type II,  Organic)

1991

S

SSPC - Paint 21White or Colored Silicone Alkyd Paint Type I, High Gloss Type II, Medium Gloss

2000

S

SSPC - Paint 22 Epoxy Polyamide Paints (Primer, Intermediate, and Topcoat)

2000

S

SSPC - Paint 23 Latex Primer for Steel Surfaces

2000

S

SSPC - Paint 24 Latex Semi gloss Exterior Topcoat

2000

S

SSPC - Paint 25 Zinc Oxide, Alkyd, Linseed Oil Primer for Use Over Hand Cleaned Steel Type I and Type II

2000

S

SSPC - Paint 26 Slow Drying Linseed Oil Black Maintenance Primer

2000

S

SSPC - Paint 27 Basic Zinc Chromate-Vinyl Butyral Wash Primer

2000

S

SSPC - Paint 101 Aluminum Alkyd Paint Leafing (Type I) and Non-Leafing (Type II)

2000

S

SSPC - Paint 102 Black Alkyd Paint

2000

S

SSPC - Paint 103 Black Phenolic Paint

2000

S

SSPC - Paint 104 White or Tinted Alkyd Paint

2000

S

SSPC - Paint 106 Black Vinyl Paint

2000

S

SSPC - Paint 108 High-Build Thixotropic Leafing Aluminum Paint

2000

S

SSPC - Paint COM Commentary on Paint Specifications

2000

S

SSPC - PC COM Steel Structures Painting Manual - surface preparation spec

2000

S

SSPC - PS 1-09 Three-Coat Oil Base Zinc Oxide Painting System

2000

S

SSPC - PS 4-02 Four-Coat Vinyl Painting System

2000

S

SSPC - PS 11-01 Black (or Dark Red) Coal Tar Epoxy Polyamide Painting System

2000

S

SSPC - TU 7 Conducting Ambient Air, Soil, and Water Sampling During Surface Preparation and Paint Distur

2000

S

SSPC Guide 11 Guide for Coating Concrete

2000

S

SSPC Guide 13 Guide for the Identification and Use of Industrial Coating Material in Computerized Production 

1998

S

SSPC Guide 14 Guide for the Repair of Imperfections in Galvanized or Inorganic Zinc Coated Steel Using O

1999

S

NFPA 34 s

2000

RP

API 5L2 Recommended Practice for Internal Coating of Line Pipe for Non-Corrosive Gas Transmission Service

2002

RP

API 5L7 Recommended Practices for Unprimed Internal Fusion Bonded Epoxy Coating of Line Pipe

1988

RP

API 5L9 External Fusion Bounded Epoxy Coating of Line Pipe

2001

HB

Insulation Inspector's Handbook (Cold)

2007

HB

Alireza Bahadori Auth. Thermal Insulation Handbook for the O

HB

Compendium of Industrial Painting & coating processes

2015

HB

Corrosion Prevention by protective coatings

2014

HB

Essentials of Coating, Painting and Lining for Oil, Gas and Petrochemical Industries

2015

Paper

Corrosion under insulation of plant and pipework v3

Paper

NFPA FPH SECTION 6-16 g

2003

Paper

NFPA FPH SECTION 6-17 s

2003