Metallic Non-Steel
S. |
Type |
Format |
Title |
Ed. |
Scope |
Author(s) |
Availability |
1 |
S |
|
ASTM B584−14 Standard Specification for Copper Alloy Sand Castings for General Applications |
2014 |
This specification covers requirements for copper alloy sand castings for general applications. |
ASTM |
Upon Request |
2 |
HB |
|
1993 |
Topics covered in this Handbook are different Alloys (Al, Ni, Ti, Cu, Zinc, Lead and others) including their Metallurgy and Data |
Michael L. Wayman and John E. Bringas |
Upon Request |
|
3 |
HB |
|
N/A |
This Handbook outlines the properties of Ferrous and Non-Ferrous Heat Resistance Alloys in addition an emphasis on superalloys |
ASM |
Upon Request |
|
4 |
HB |
|
Properties and Selection Nonferrous Alloys and Special-Purpose Materials |
1990 |
This is the second of two volumes in the ASM Handbook that present information on compositions, properties, selection, and applications of metals and alloys. In the present volume, nonferrous alloys, superconducting materials, pure metals, and materials developed for use in special applications are reviewed. |
ASM |
Upon Request |
5 |
HB |
|
1998 |
The Metals Handbook Desk Edition is intended to serve as a comprehensive single-volume reference source on the properties, selection, processing, testing, and characterization of metals and their alloys. |
ASM |
Upon Request |
|
6 |
HB |
|
1992 |
This book provides a comprehensive and authoritative source of information on metals and alloys. - Lavoisier Documentation; One can readily refer to literally thousands of current international specifications, identify the materials suitable to meet them and, to a large extent, successfully locate the relevant suppliers. - Metals & Materials; ...as a convenient reference for established alloys, |
Robert B. Ross |
Upon Request |
|
7 |
Comparison |
DOCX |
2016 |
Comparative Tables for Carbon steels, Stainless steel and nonferrous metals |
Mohamed El Ganzory |
Free |
|
8 |
Comparison |
DOCX |
N/A |
Comparative Tables for Titanium, Hastelloy and Material Selection Guide |
Mohamed El Ganzory |
Free |
|
9 |
Comparison |
DOCX |
2015 |
Material Comparison For ferrous and non-Ferrous materials with different standards for applications such as pipes, bolts, flanges ,etc. |
Mohamed El Ganzory |
Free |
|
10 |
Paper |
|
New Ceramic-Metallic Materials for Choke Valves in Oil Production |
N/A |
The present paper gives a short review of the research work and the results used as a basis for the indicated cost reduction. Only tungsten carbide grades are dealt with in the paper since earlier erosion testing has shown that this type of material has a suitable combination of fracture toughness and erosion resistance. Pure ceramic materials are still considered too brittle and all metallic materials are too soft for this service. |
C. H. Ahlen, E. Bardal F, L. Marken and T. Solem |
Upon Request |
11 |
Datasheet |
|
2008 |
This Datasheet specifies different types of TI-AL Alloys and their mechanical properties. |
S. L. Draper and B. A. Lerch |
Upon Request |