Companies Specifications Details

Files

Type
Format
Title
Edition
Description
Author
Availability
S application/pdf

01-SAMSS-005 Shop applied , Internal Cement mortar Lining of Steel Pipe

2004

This specification defines the requirements for shop applications of cement mortar lining to the internal surfaces of steel pipe. It includes materials, surface preparation, application and testing. Only shop applied, internal, lining shall be required by this specification. It does not address coating external pipe surfaces or field application of lining.

Saudi Aramco

Free

S application/pdf

01-SAMSS-010 Fabricated Carbon Steel Piping

2005

This specification defines the minimum mandatory requirements governing the fabrication of carbon steel pipe spools, including welding, heat treatment, cold bending, and threading of pipes.

Saudi Aramco

Free

S application/pdf

01-SAMSS-012 Submarine Pipe Weight Coating

2003

This specification covers the concrete weight coating requirements for line pipe used underwater where additional mass must be added to compensate for buoyancy. It is intended to provide specifications for weight coating individual pipe joints prior to incorporation into a pipeline. This Specification does not cover requirements for the line pipe nor does it include requirements for internal or pipe external corrosion coatings.

Saudi Aramco

Free

S application/pdf

01-SAMSS-016 Qualification of Pipeline, In Plant Piping and Pressure Vessel Steels for Resistance to HIC

2007

This specification is supplementary to the current NACE Standard TM0284 (Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen- Induced Cracking [HIC]).

Saudi Aramco

Free

S application/pdf

01-SAMSS-017 Auxiliary Piping for Mechanical Equipment

2005

This specification defines the minimum mandatory requirements for the design, fabrication, installation and inspection of auxiliary piping associated with compressors, pumps, fans, turbines, engines and gears.

Saudi Aramco

Free

S application/pdf

01-SAMSS-022 Fracture Control Testing Procedures for Line Pipe

2007

This specification defines the fracture toughness testing procedures applicable to line pipe purchased in accordance with 01-SAMSS-035 and 01-SAMSS-038. This specification is applicable to pipe with nominal diameters equal to or greater than 4 inches, wall thicknesses of 6.3 mm to 38 mm (0.25 to 1.5 inch), for use in cross-country pipelines, offshore pipelines, flowlines, and trunklines at design temperatures above 0ºC. All testing shall be in accordance with API SEPC 5L as modified herein.

Saudi Aramco

Free

S application/pdf

01-SAMSS-024 Pipe Handling and Nesting

2006

This Specification defines minimum mandatory requirements governing the handling, loading, nesting and denesting of steel line pipe in sizes 60 mm OD and larger and in lengths longer than single random.

Saudi Aramco

Free

S application/pdf

01-SAMSS-029 Fiberglass Sewer Pipe and Fittings for Gravity Flow

2003

This specification defines the requirements for fiberglass pipe, intended for use in gravity flow systems for conveying sanitary sewage, storm water, and some chemical and industrial wastes.

Saudi Aramco

Free

S application/pdf

01-SAMSS-034 Fiberglass Pressure Pipe and Fittings

2007

This specification defines the requirements for glass-fiber-reinforced thermosetting resin pipe(RTRP) and glass-fiber-reinforced plastic-mortar pipe (RPMP) as defined in AWWA C950-01 couplings, fittings, flanges and spools using polyester, vinyl ester or epoxy resin with restrained or unrestrained joints.

Saudi Aramco

Free

S application/pdf

01-SAMSS-035 API Line Pipe

2008

This Specification covers seamless and submerged-arc welded (SAW), straight-seam and spiral-seam, steel line pipe manufactured in accordance with API SPEC 5L (44th Edition, 2007) to Product Specification Level 2. Unless stated to the contrary in the Purchase Order, pipe manufactured to this specification must be suitable for internal and external coating with fusion bonded epoxy and other applicable coating materials. See paragraphs 9.10.7, 9.11.3.3 c and 9.13.2.2 c.

Saudi Aramco

Free

S application/pdf

01-SAMSS-039 Induction and Furnace Hot Pipe Bends

2010

This specification covers shop fabricated pipe hot bends including induction and furnace pipe bends.

Saudi Aramco

Free

S application/pdf

02-SAMSS-001 Piping Components for Low Temperature Service

2008

This specification prescribes the requirements that apply to carbon steel and low alloy steel piping components for use in services with design minimum temperatures within the range of -18°C to -45°C.

Saudi Aramco

Free

S application/pdf

02-SAMSS-005 Butt Welding Pipe Fittings

2007

This Specification supplements the requirements of ASME B16.9, ASTM A234 for Grade WPB wrought carbon steel pipe fittings, and MSS SP-75 for high strength fittings. Normally, it only applies to fittings that are purchased "loose." This Specification does not apply to fittings installed on equipment that is engineered, manufactured, and tested prior to delivery to Saudi Aramco unless specifically invoked in the Purchase Order.

Saudi Aramco

Free

S application/pdf

02-SAMSS-006 Hot Tap and Stopple Fittings

2008

This specification provides the requirements for design, material selection, fabrication, testing and marking of hot tap and stopple fittings including: split tees, stopple fittings, full encirclement saddles, flanges and Lock-O-Ring (LOR) flanges to be used in sweet or wet sour service.

Saudi Aramco

Free

S application/pdf

02-SAMSS-009 Design and Fabrication of Scraper Traps

2004

This specification defines the minimum mandatory requirements governing the design, fabrication and material selection of permanent scraper traps for line sizes 4-inch and larger and for pressure ratings Classes 150 through 1500. The scraper traps covered by this specification are for launching and/or receiving of a single (cleaning, batching, displacement and/or instrumented) scraper for water or hydrocarbon pipelines onshore or offshore.

Saudi Aramco

Free

S application/pdf

02-SAMSS-011 Forged Steel Weld Neck Flanges for Low Intermediate and High Temperature Service

2007

This specification covers Saudi Aramco requirements for forged steel weld neck flanges that are suitable for use from -120ºC up to +538ºC. Special configuration flanges such as pipeline anchors, long weld neck flanges, integrally reinforced flanges, out-size flanges, and lapped joint and swivel ring assemblies are included.

Saudi Aramco

Free

S application/pdf

04-SAMSS-001 Gate Valves

2005

This specification, along with the purchase order, defines the minimum requirements for steel, bolted bonnet, pressure seal bonnet, flanged and butt-welding end gate valves of outside screw and yoke (OS&Y) construction. Included are nominal pipe sizes (NPS) 1 through 24 for Classes 150 through 2500, as covered by API STD 600.

Saudi Aramco

Free

S application/pdf

04-SAMSS-002 Globe Valves

2005

This specification, along with the purchase order, defines the minimum requirements for steel, bolted bonnet, pressure seal bonnet, flanged and butt-welding end globe, angle globe, "Y" pattern globe and globe stop check valves, of outside screw and yoke (OS&Y) construction, in nominal pipe sizes (NPS) 1 and larger in Classes 150 through 2500. Valves covered by this specification shall be suitable for wet, sour liquid or gaseous hydrocarbon services with design temperatures between -18 and 400°C.

Saudi Aramco

Free

S application/pdf

04-SAMSS-003 Additional Requirements for Temperature Valves

2005

This specification, along with the purchase order, defines the minimum additional requirements for steel valves in services with minimum design temperatures in the range of -18ºC to -45ºC.

Saudi Aramco

Free

S application/pdf

04-SAMSS-005 Check Valves , Swing Type

2005

This specification, together with the Purchase Order, covers the minimum requirements for steel, bolted bonnet, flanged and buttwelding end, swing check valves in 2 inches nominal pipe size (NPS) and larger for ASME Classes 150 through 2500. Valves covered by this specification shall be suitable for wet, sour liquid or gaseous hydrocarbon services with design temperature between -18 and 400°C.

Saudi Aramco

Free

S application/pdf

04-SAMSS-035 General Requirements for Valves

2005

This Specification defines the general requirements for valves normally classified under Saudi Aramco Materials System (SAMS) Class 04.

Saudi Aramco

Free

S application/pdf

04-SAMSS-041 Expanding Plug Valve

2005

This specification together with the Purchase Order covers the minimum requirements for steel, double block and bleed, non-lubricated plug valves with retracting soft seals (expanding plug valves) in nominal pipe size (NPS) 2 through 36 inch for ASME Classes 150 through 900. Valves covered by this specification shall be suitable for non-sour hydrocarbon services between temperatures of -18 and 120°C.

Saudi Aramco

Free

S application/pdf

04-SAMSS-042 4-Way Diverter Valve

2005

This specification, along with the purchase order, defines the minimum requirements for steel 4-way diverter valves with resilient seats for bi-directional meter prover systems in nominal pipe sizes (NPS) 2 through 24 inch for ASME Classes 150 through 600. Valves covered by this specification shall be suitable for non-sour hydrocarbon services up to a maximum temperature of 120°C.

Saudi Aramco

Free

S application/pdf

04-SAMSS-047 High Performance Butterfly Valves

2008

This specification- along with the purchase order- defines the minimum requirements for resilient or metal seated, steel, double flanged and lug type high performance butterfly valves, including the triple-offset type, in accordance with API STD 609 Category B. Valves covered by this specification shall be suitable for wet sour liquid or gaseous hydrocarbon services with design temperatures (a) between -18 and 425°C for metal seated valves, and (b) between -18 and 120°C for soft seated valves.

Saudi Aramco

Free

S application/pdf

04-SAMSS-050 Gate Valves Through conduit type, API SPEC 6D

2005

This Specification along with the Purchase Order covers the minimum requirements for steel, soft-seated, full bore, slab gate, through-conduit type gate valves in nominal pipe sizes (NPS) 2 inch and larger for ASME Classes 150 through 2500. Valves covered by this Specification shall be suitable for wet, sour liquid or gaseous hydrocarbon services between -18 and 120°C. For Low Temperature Service From -45°C to -18°C, 04-SAMSS-003 should be applied.

Saudi Aramco

Free

S application/pdf

04-SAMSS-050 Gate Valves Through conduit type, API SPEC 6D

2005

This Specification along with the Purchase Order covers the minimum requirements for steel, soft-seated, full bore, slab gate, through-conduit type gate valves in nominal pipe sizes (NPS) 2 inch and larger for ASME Classes 150 through 2500. Valves covered by this Specification shall be suitable for wet, sour liquid or gaseous hydrocarbon services between -18 and 120°C. For Low Temperature Service From -45°C to -18°C, 04-SAMSS-003 should be applied.

Saudi Aramco

Free

S application/pdf

04-SAMSS-052 Ball Valves, API SPEC 6A

2005

This Specification along with the Purchase Order covers the minimum requirements for soft-seated, flanged end, trunnion-supported, full bore ball valves in nominal sizes 2-1/16 inches and above in API SPEC 6A Rated Working Pressures (ratings) up to 5000 psi. Valves covered by this Specification shall be suitable for wet, sour liquid or gaseous hydrocarbon services between -18 and 120°C.

Saudi Aramco

Free

S application/pdf

04-SAMSS-053 Steel Lubricated Plug Valves Flanged and Welding End

2008

This specification together with the Purchase Order covers the minimum requirements for steel lubricated plug valves in nominal pipe size (NPS) 2 and larger for ASME Classes 150 through 2500, and in sizes 1-13/16 inches and larger for API maximum rated working pressures of 2000 through 5000 psi.

Saudi Aramco

Free

S application/pdf

09-SAMSS-080 Shop applied Baked Internal Coatings

2008

This specification defines the minimum mandatory requirements for internal, shop-applied, heat-cured, internal liquid coating systems for the surfaces of: a) Steel tubular products and b) Heat exchanger tubes, tube sheets, and covers; and c) Custom coated items such as fittings, couplings, pipe spools, valves, and the wetted portions of spectacle plates, blinds, and spacers.

Saudi Aramco

Free

S application/pdf

09-SAMSS-089 Shop Applied External Fusion Bonded Epoxy Coating for Steel Line Pipes

2005

This Specification, together with the Purchase Order and appropriate Data Sheets, defines the minimum mandatory requirements of shop-applied, heat cured external fusion-bonded epoxy (FBE) coating systems for the external surfaces of steel tubular products and associated fittings and couplings.

Saudi Aramco

Free

S application/pdf

09-SAMSS-090 Shop Applied Extruded P.E External Coating System for Line Pipe

2004

This Specification defines the minimum requirements for the shop application of 3-layer extruded polyethylene coating for the external corrosion protection of pipe in buried or subsea services. The coating system consists of a fusion bonded epoxy primer plus an extruded ethylene copolymer adhesive beneath a high-density polyethylene topcoat.

Saudi Aramco

Free

S application/pdf

09-SAMSS-091 Qualification Requirements for Shop Applied Internal FBE Coatings

2005

This specification defines the minimum mandatory requirements of shop-applied fusion bonded epoxy FBE powder coating systems for the internal surfaces of steel tubular products and associated fittings and couplings.

Saudi Aramco

Free

S application/pdf

09-SAMSS-095 Hand Applied Pressure Sensitive Tapewrap for Temperatures up to 55C

2007

This Specification together with the Purchase Order covers the minimum requirements for hand-applied, pressure sensitive tapewrap for external corrosion control on buried or subsea pipe at service temperatures up to 55°C.

Saudi Aramco

Free

S application/pdf

09-SAMSS-096 High Temperature Heat Shrink Sleeves

2007

This Specification together with the Purchase Order covers the minimum requirements of heat-shrink sleeves used for external corrosion protection on the field girth weld areas of pipe that has been shop coated with fusion-bonded epoxy per 09-SAMSS-089 or spirally-extruded polyethylene per 09-SAMSS-090. Two types of sleeves are covered

Saudi Aramco

Free

S application/pdf

09-SAMSS-105 Heat Shrink Sleeves for Service Temperature less than 55C

2007

This Specification together with the Purchase Order covers the minimum requirements of heat-shrink sleeves used for external corrosion protection on the field girth weld areas of pipe that has been shop coated with polyethylene or fusion bonded epoxy. The sleeves are suitable for service temperatures up to 55°C.

Saudi Aramco

Free

S application/pdf

12-SAMSS-007 Fabrication of Structural and Miscellaneous Steel

2006

This Specification defines the requirements for material selection, connections, detailing, fabrication, galvanizing, painting and coatings, marking for erection and delivery of structural and miscellaneous steel. Erection of structural steel shall be per 12-SAMSS-008. Offshore structures and pre-engineered metal buildings are excluded from this specification.

Saudi Aramco

Free

S application/pdf

12-SAMSS-008 Erection of Structural and Miscellaneous Steel

2004

This Specification defines the requirements for the receipt, handling, erection, assembly, and field inspection of structural and miscellaneous steel. Offshore structures and pre-engineered metal buildings are excluded from this specification.

Saudi Aramco

Free

S application/pdf

12-SAMSS-014 Pre engineered Metal Buildings

2008

This Specification defines the minimum mandatory requirements for the design, material selection, fabrication and packaging of one-story pre-engineered metal buildings with or without mezzanines. This specification also applies to unenclosed structures such as sunshades and carports that are furnished by a pre-engineered metal building vendor.

Saudi Aramco

Free

S application/pdf

12-SAMSS-018 Structures Plates, Rolled Shapes and Tabular Specification for fixed Offshore Platforms

2008

This specification defines the grades of carbon steel plates, rolled shapes, and tubulars that must be used for the design and construction of a fixed offshore platform in accordance with API RP 2A-WSD. It gives additional minimum requirements for the manufacture and supply of this material. It also gives acceptable substitute materials.

Saudi Aramco

Free

S application/pdf

12-SAMSS-025 Specification for Heavy Duty PTFE and PFA Lined Carbon Steel Pipe and Fittings

2007

This Specification covers requirements for materials, fabrication, quality, qualification, marking and inspection for ASME/ANSI class 150 and 300 heavy duty PTFE and PFA lined carbon steel flanged pipe and fittings transporting corrosive fluids. It covers pipe sizes from NPS 1 to 20 inch for a maximum pressure of 150 psi for ASME/ANSI class 150 and 300 psi for ASME/ANSI class 300, in the temperature range of -20 to 230°C (446°F), inclusive.

Saudi Aramco

Free

S application/pdf

30100211 Metallic Materials

2002

This DEP specifies appropriate standards for metallic construction materials

Shell Dep

Free

S application/pdf

30100213 Non- Metallic Materials Selection and Application

2003

This DEP specifies requirements and gives recommendations for the initial selection of non-metallic materials.

Shell Dep

Free

S application/pdf

31-SAMSS-001 Axial and Centrifugal Compressors and Expander Compressors

2007

This specification, together with the Data Sheet and the Purchase Order, covers mandatory requirements for centrifugal, axial and integrally geared compressors and expander-compressors.

Saudi Aramco

Free

S application/pdf

31-SAMSS-004 Centrifugal Pumps

2008

This Specification, together with the appropriate centrifugal pump Data Sheet and Purchase Order, covers minimum requirements for API STD 610 and ISO 13709.

Saudi Aramco

Free

S application/pdf

31-SAMSS-009 Positive Displacement Pumps

2008

This Specification, together with the Pump Data Sheet and Purchase Order, defines the minimum mandatory requirements for positive displacement, controlled volume pumps of the diaphragm and packed plunger types. Diaphragm pumps using direct mechanical actuation are excluded from this Specification.

Saudi Aramco

Free

S application/pdf

31244031 Materials for high-temperature Conversion Process Furnace Parts

2000

This DEP specifies requirements and gives recommendations for selection of materials for furnace parts which under operating conditions will have a metal temperature above 700 °C. For furnace tubes, this metal temperature shall be taken to be the skin temperature.

Shell Dep

Free

S application/pdf

32-SAMSS-004 Manufacture of Pressure Vessels

2005

This specification covers the minimum mandatory requirements for the manufacture of pressure vessels. The requirements are in addition to and supplement the requirements of the ASME Boiler and Pressure Vessel Codes.

Saudi Aramco

Free

S application/pdf

32-SAMSS-005 Manufacture of Atmospheric Tanks

2008

This specification defines the minimum mandatory requirements governing material, mechanical design, fabrication, erection, inspection, and testing of Atmospheric Tanks

Saudi Aramco

Free

S application/pdf

32-SAMSS-006 Manufacture of Low Pressure Tanks

2008

This specification defines the minimum mandatory requirements governing material, mechanical design, fabrication, erection, inspection, and testing of low-pressure storage tanks.

Saudi Aramco

Free

S application/pdf

32-SAMSS-007 Manufacture of Shell and Tube Heat Exchangers

2008

This specification covers the minimum mandatory requirements for the manufacture of shell and tube heat exchangers and new components (herein referred to as exchangers). It does not cover exchangers that undergo repairs or alterations.

Saudi Aramco

Free

S application/pdf

32-SAMSS-011 Manufacture of Air cooled Heat Exchanger

2008

This specification covers the minimum mandatory requirements for the manufacture of new air-cooled heat exchangers (herein referred to as exchangers). It does not cover exchangers that undergo repairs or alterations. This specification does not cover skid mounted exchangers, or exchangers that are part of air conditioning equipment or exchangers that do not fall in the general exchanger types covered in API STD 661.

Saudi Aramco

Free

S application/pdf

32-SAMSS-019 Manufacture of Plate and Frame Heat Exchangers

2008

This specification covers the minimum mandatory requirements for the manufacture of new plate and frame type heat exchangers (hereinafter referred to as exchangers) for hydrocarbon and utility services.

Saudi Aramco

Free

S application/pdf

32-SAMSS-020 Manufacture of Trays and Packing

2007

This specification covers the minimum mandatory requirements for the manufacture and installation of new tray systems and inert packing.

Saudi Aramco

Free

S application/pdf

32-SAMSS-022 Manufacture of Components for Flare Systems

2002

This specification covers the minimum mandatory requirements for the design, fabrication, materials, and inspection of new flare systems and includes: flare stacks, flare tips, dry gas seals, liquid-seals, and flare knockout drums.

Saudi Aramco

Free

S application/pdf

32-SAMSS-027 Manufacture of Electric Heat Exchangers

2008

This specification covers the minimum mandatory requirements for the thermal design, mechanical design, materials, fabrication, inspection and testing of new electrical immersion-type heaters (hereinafter referred to as exchangers) in hydrocarbon, hydrogen, and utility services.

Saudi Aramco

Free

S application/pdf

32-SAMSS-028 Manufacture of Double Pipe Heat Exchangers

2008

This specification covers the minimum mandatory requirements for the mechanical design, materials, fabrication, inspection and testing of new double pipe and multitube hairpin heat exchangers (hereinafter referred to as exchangers). It does not cover exchangers that undergo repairs or alterations.

Saudi Aramco

Free

S application/pdf

32-SAMSS-030 Manufacture of Small Tanks

2006

This Saudi Aramco Materials System Specification (SAMSS) defines the minimum mandatory requirements governing material, design, fabrication, inspection, and testing of small, atmospheric pressure storage tanks used in production, process plant, bulk plant, building services, fuel dispensing, or community facilities applications.

Saudi Aramco

Free

S application/pdf

32-SAMSS-031 Manufacture of Clad Vessels and Heat Exchangers

2003

This specification covers the minimum mandatory requirements for the manufacture of new pressure vessels and shell-and-tube heat exchangers in hydrocarbon, hydrogen, caustic, amine, wet sour, steam, and utility services with corrosion resistant cladding and weld overlays.

Saudi Aramco

Free

S application/pdf

34-SAMSS-611 Safety Relief Valves Conventional and Balanced Types

2008

This specification together with Buyer's Quotation Request or purchase order and Specification Sheet(s) 8020-611-ENG define the minimum technical requirements for conventional and balanced type industrial safety relief valves.

Saudi Aramco

Free

S application/pdf

34-SAMSS-612 Safety Relief Valves Pilot Operated Types

2006

This specification together with Buyer's Quotation Request or Purchase Order and Specification Sheet 8020-612-ENG define the minimum technical requirements for pilot operated type industrial safety relief valves used on equipment that has a maximum allowable working pressure of 15 Psig or greater.

Saudi Aramco

Free

S application/pdf

34-SAMSS-711 Control Valves

2008

This specification, together with the Purchase Order, Instrument Specification Sheet (ISS) Form 8020-711-ENG, Form 8020-712-ENG or Form 8020-713-ENG, NMR-7925, and Inspection Requirements Form 175-340100 or 175-340150 define the minimum mandatory requirements for general service pneumatically operated steel control valves up to and including Class 2500 ratings. This specification is not applicable to on/off valves.

Saudi Aramco

Free

S application/pdf

34-SAMSS-831 Instrumentation for Packaged Units

2008

This specification defines the minimum requirements for instrumentation provided for pre-engineered, pre-assembled and pre-wired skid mounted packaged units. This specification does not apply to custom engineered packaged units.

Saudi Aramco

Free

S application/pdf

39011011 Selection of Materials for Life Cycle Performance Upstream Equipment

2020

The scope is limited to design requirements and deliverables.

Shell Dep

Free

S application/pdf

45-SAMSS-005 Valves and Wellhead Equipment

2004

API SPEC 6A, in conjunction with this specification, and the Purchase Order, defines the minimum requirements for Saudi Aramco oil and gas production trees, wellheads, valves and miscellaneous equipment relating to the wellhead as covered by API SPEC 6A.

Saudi Aramco

Free

S application/pdf

45-SAMSS-013 High Frequency Welded solid Expandable Tubulars

2006

This SAMSS applies to the Manufacture of Solid Expandable Tubulars (SET), with an outside diameter of 3-½ inches (88.9 mm) and larger operating at a temperature above 80oC.

Saudi Aramco

Free

S application/pdf

COE10508 Material Selection for new construction and Maintenance

N/A

This document shall give a general illustration to the material selection for newly constructed Equipment and their Maintenance

Saudi Aramco

Free

S application/pdf

COE10509 Cost Effective Materials Selection

N/A

In this module the major factors involved in the selection of the most cost-effective material for a given service are reviewed. A simulation exercise will provide the Participant with an opportunity to integrate and apply the information from prior modules with the new information, and to choose the most appropriate material for a given situation.

Saudi Aramco

Free

S application/pdf

MEX10102 Material Selection

N/A

This document shall give a general illustration to the material selection process

Saudi Aramco

Free

S application/pdf

MEX20202 Material of Construction for Pressure Vessels

N/A

This document shall give a general illustration to the material selection for Pressure Vessels

Saudi Aramco

Free

S application/pdf

MP 55-P-19 Material and Corrosion for Sour Service

1998

This ExxonMobil Engineering Practice (EMEP) shall be used for the design of sour service materials for onshore and offshore production and processing facilities.

Exxon Mobile

Free

S application/pdf

MP55P01 Materials Applications

1998

This ExxonMobil Engineering Practice (EMEP) provides information for the selection of materials for refinery units.

Exxon Mobil

Free

S application/pdf

QP Guideline for Material Selection (Non-Sour Service)

N/A

This document covers the various engineering materials used in special applications in QP operation other than Sour service. It specifies the service limits/requirement for these materials in terms of ( Service conditions such as minimum & maximum operating temperatures, Design requirements such as load limits, lifetime, installation & operational constraints).

QP

Free

S application/pdf

QP-STD-R-001 R3 Material Selection for Sour Service

N/A

This Standard specifies detailed QP requirements for various construction materials to be used in wet sour services covering upstream and downstream oil and gas production systems.

QP

Free

S application/pdf

Shell DEP 30.10.02.13-Gen. Non-Metallic Materials - Selection and Application

2003

This DEP specifies requirements and gives recommendations for the initial selection of non-metallic materials.

Shell Dep

Free

S application/pdf

Shell DEP Selection of Mat. for lifecycle performance - DEP 39.01.10.11-Gen

2002

This new DEP specifies requirements and gives recommendations covering materials selection, corrosion mitigation and corrosion monitoring for production systems from the reservoir to the export point. It enables technically proven and economically acceptable materials selection for most equipment. It does not include structural steel for offshore platforms or superstructures, instrumentation (but does include instrument tubing), or packaged equipment such as compressors (except for general guidance (1.2))

Shell Dep

Free