Design Validation Details

all about pigging

All About Pigging: The Design of Pipelines and Facilities for Conventional and Intelligent Pigging and A Guide to Pig Selection, Operation and Maintenance and To Pipeline Pigging Services

Jim Cordell & Hershel Vanazant

Upon Request

3,087 KB

API RP 1110 - Recommended Practice for the Pressure Testing of Steel Pipelines 2018

This RP applies to all parts of a pipeline or pipeline facility including line pipe, pump station piping, terminal piping, compressor station piping, metering station piping, delivery station piping, regulator station piping, appurtenances connected to line pipe, appurtenances connected to facility piping, fabricated assemblies, valves, tees, elbows, reducers, flanges, and any other pipeline equipment or appurtenances.

API

Upon Request

287 KB

API RP 1169 - Pipeline Construction Inspection - SECOND EDITION

API Recommended Practice 1169, Pipeline Construction Inspection, has been published to improve safety and sustainability during a pipeline’s construction activities. The latest update outlines issues pipeline inspectors should review during construction, with a new emphasis on creating effective working relationships between operators, inspectors, and contractors. The scope of covered activities is also expanded in the 2nd Edition to cover all aspects of pipeline construction.

API

Upon Request

12,203 KB

API Spec 6D - Specification for Pipeline and Piping Valves

API Spec 6D specifies requirements and gives recommendations for the design, manufacturing, testing and documentation of ball, check, gate, and plug valves for application in pipeline systems.

API

Upon Request

1,695 KB

ASME B 16.49 - Factory-Made Wrought Stell Buttwelding Induction Bends for Transportation And Distribution Systems

This Standard covers design, material, manufacturing, testing, marking, and inspection requirements for factory-made pipeline bends of carbon steel materials having controlled chemistry and mechanical properties, produced by the induction bending process, with or without tangents. This standard covers induction bends for transportation and distribution piping applications (e.g., ASME B31.4, B31.8, and B31.11). Process and power piping

ASME

Upon Request

943 KB

ASME B 16.5 - Pipe Flanges and Flanged Fittings

This Standard covers pressure–temperature ratings, materials, dimensions, tolerances, marking, testing, and methods of designating openings for pipe flanges and flanged fittings.

ASME

Upon Request

2,434 KB

ASME B31.12 - Hydrogen Piping and Pipeline

ASME B31.12 Standard on Hydrogen Piping and Pipelines contains requirements for piping in gaseous and liquid hydrogen service and pipelines in gaseous hydrogen service. The general requirements section covers materials, brazing, welding, heat treating, forming, testing, inspection, examination, operating, and maintenance. The industrial piping section covers requirements for components, design, fabrication, assembly, erection, inspection, examination, and testing of piping.

ASME

Upon Request

3,718 KB

ASME B31.4 - Pipeline Transportation System for Liquids and Slurries

ASME B31.4 prescribes requirements for the design, materials, construction, assembly, inspection, testing, operation, and maintenance of liquid pipeline systems between production fields or facilities, as well as pipelines transporting liquids within pump stations, tank farms, and terminals associated with liquid pipeline systems.

ASME

Upon Request

2,197 KB

DNV OS F101 Submarine Pipeline Systems

ensure that the concept development, design, construction, operation and abandonment of pipeline systems are safe and conducted with due regard to public safety and the protection of the environment, provide an internationally acceptable standard of safety for submarine pipeline systems by defining minimum requirements for concept development, design, construction, operation and abandonment,

DNV

Upon Request

2,488 KB

Pipelines Welding Handbook

This handbook describes both methods. Ample space has been dedicated, in particular, to manual welding, with particular reference to the operative practice and quality assessment, due to its considerable use still today, but not neglecting more modern and productive methods which will be increasingly used in future.

ESAB

Upon Request

86 KB

flow of fluids through valve fittings and pipes

Crane Technical Paper No. 410 (TP-410) is the quintessential guide to understanding the flow of fluid through valves, pipes and fittings, enabling you to select the correct equipment for your piping system. Originally developed in 1942, the latest edition of Crane TP-410 has been fully updated to reflect the latest knowledge and research in the fluid handling industry. The TP-410 has served as an indispensable technical resource for over 60 years to specifying engineers, designers and engineering students.

CRANE

Upon Request

3,850 KB

Guideline For Hydrostatic Test Dewatering

This document shall be used as a guide for the preparation of plans and specifications for the discharge of water used for hydrostatic testing of new or existing pipelines that have or will transport hydrocarbon products under the jurisdiction of the Oil Conservation Division (OCD). These include crude oil pipelines and all natural gas pipelines. Hydrostatic testing of these pipelines may lead to the production of water, which is contaminated with organic compounds which, if not discharged properly,

New Mexico

Upon Request

6 KB

Hydrostatic Testing.

This Presentation covers the Hydrostatic Tests and it's requirements

California Public Utilities Commission

Upon Request

1,066 KB

ISO 3183 - Petroleum and Natural Gas Industries - steel pipe for pipeline transportation

This document specifies requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of seamless and welded steel pipes for use in pipeline transportation systems in the petroleum and natural gas industries. This document supplements API Spec 5L, 46th edition (2018), the requirements of which are applicable with the exceptions specified in this document. This document is not applicable to cast pipe.

ISO

Upon Request

450 KB

ISO 5256 - Steel Pipes and Fittings for Buried or Submerged Pipelines - External and Internal Coating by B

This International Standard specifies the bitumen and coal tar derived coatings suitable for protecting the external and internal surfaces of steel pipes and fittings, either individually or after assembly, and used in buried pipelines or conduits, or underground galleries, or submerged, and also the conditions for the application of such protective coatings.

ISO

Upon Request

1,056 KB

Offshore Pipelines - Design, Installation, and Maintenance

The development of oil and gas fields offshore requires specialized pipeline equipment. The structures must be strong enough to withstand the harshest environments and ensure that production is not interrupted and remains economically feasible. However, recent events in the Gulf of Mexico have placed a new importance on maintenance and reliability.

Boyun Guo, Shanhong Song, Ali Ghalambor & Tian Ran Lin

Upon Request

3,090 KB

Oil & Gas Pipelines Integrity and Safety HB

A comprehensive and detailed reference guide on the integrity and safety of oil and gas pipelines, both onshore and offshore

R. WINSTON REVIE

Upon Request

50,694 KB

Oil and Gas Pipelines and Piping Systems

It covers Design, Construction, Management, and Inspection delivers all the critical aspects needed for oil and gas piping and pipeline condition monitoring and maintenance, along with tactics to minimize costly disruptions within operations. Broken up into two logical parts, the book begins with coverage on pipelines, including essential topics, such as material selection, designing for oil and gas central facilities, tank farms and depots, the construction and installment of transportation pipelines.

Alireza Bahadori, PhD, CEng, MIChemE, CPEng, MIEAust, RPEQ

Upon Request

10,378 KB

oil pipeline systems CAN-CAS-Z183-M90

Covers the design, material selection, fabrication, installation, inspection, testing, operation, maintenance, and repair of onshore pipeline systems that transport liquid hydrocarbons, including crude oil, multiphase fluids, condensate, liquid petroleum products, natural gas liquids, liquefied petroleum gas, and oilfield water.

CSA

Upon Request

5,369 KB

Pipeline Design & Construction - A practical Approach

This comprehensive book offers straightforward, practical techniques for pipeline design and construction, making it an ideal professional reference, training tool, or text for specialized college courses.

M. Mohitpour H. Golshan A. Murray

Upon Request

32,963 KB

PIPELINE ENGINEERING 1995 ASME PD VOL. 69

This paper describes the development of a fault displacement risk model, The evaluation of the risk at the (AAPL) site provided by an initial crossing design, and

ASME

Upon Request

4,014 KB

Pipeline Integrity Handbook. Risk Management and Evaluation (2014)

the author goes beyond corrosion control, providing techniques for addressing present and future integrity issues. Pipeline Integrity Handbook provides pipeline engineers with the tools to evaluate and inspect pipelines, safeguard the life cycle of their pipeline asset and ensure that they are optimizing delivery and capability. Pipeline Integrity Handbook is a quick reference for day-to-day use in identifying key pipeline degradation mechanisms and threats to pipeline integrity.

RAMESH SINGH

Upon Request

6,158 KB

Pipeline Planning and Construction Field Manual

Pipeline Planning and Construction Field Manual aims to guide engineers and technicians in the processes of planning, designing, and construction of a pipeline system, as well as to provide the necessary tools for cost estimations, specifications, and field maintenance. The text includes understandable pipeline schematics, tables, and DIY checklists.

E. Shashi Menon, Ph.D., P.E.

Upon Request

2,767 KB

Pipeline Rules of Thumb Handbook,

Presented in easy-to-use, step-by-step order, Pipeline Rules of Thumb Handbook is a quick reference for day-to-day pipeline operations. For more than 35 years, the Pipeline Rules of Thumb Handbook has served as the "go-to" reference for solving even the most day-to-day vexing pipeline workflow problems.

E.W. McAllister

Upon Request

6,968 KB

Pipeline Steels For Sour Service

This book summarizes the results of experimental work on the development of technologies for the manufacture of sour service line pipe steels. It presents the latest theories on the mechanisms of cracking and factors affecting fracture resistance in H2S-containing media of low-alloy pipe steels. The authors propose methods for improving the quality of continuously cast slabs and show the effect of the chemical composition on the microstructure and properties of rolled plates for pipes.

Carlos P. Bergmann, Porto Alegre, Brazil

Upon Request

10,345 KB

Piping & Pipeline Calculations Manual Construction Design Fabrication and Examination

Piping and Pipeline Calculations Manual is a "no nonsense" guide to the principal intentions of the codes or standards and provides advice on compliance. After using this book, the reader should come away with a clear understanding of how piping systems fail and what the code requires the designer, manufacturer, fabricator, supplier, erector, examiner, inspector, and owner to do to prevent such failures.

J. Phillip Ellenberger

Upon Request

16,162 KB

Piping and Pipeline Assessment Guide

This volume on piping and pipeline assessment is the only handbook that the mechanical or pipeline engineer needs to assess pipes and pipelines for reliability and fitness-for-service.

A. Keith Escoe

Upon Request

4,795 KB

Piping and Pipeline Engineering Book

Taking a big-picture approach, Piping and Pipeline Engineering: Design, Construction, Maintenance, Integrity, and Repair elucidates the fundamental steps to any successful piping and pipeline engineering project, whether it is routine maintenance or a new multi-million-dollar project. The author explores the qualitative details, calculations, and techniques that are essential in supporting competent decisions.

George A.Antaki

Upon Request

2,063 KB

Piping Systems Pipeline ASME Code Simplified

this book will center on the on the practical aspects of piping and pipeline design, integrity, maintenance and repair. This book will cover such topics as: inspection techniques, from the most common (PT, MT, UT, RT, MFL pigs) to most recent (AE, PED, UT pigs and multi pigs), the implementation of integrity management programs, periodic inspections and evaluation of results.

J. Phillip Ellenberger, P.E.

Upon Request

2,306 KB

Practical Guide to ASME B31.3 Process Piping

This Handbook provides a guide to process piping according to ASME B 31.3

Glynn Woods, Roy Baguley

Upon Request

1,199 KB

Quick Guide to Pipeline Engineering.

A Quick Guide to Pipeline Engineering provides concise, easy-to-use, and accessible information on onshore and offshore pipeline engineering. Topics covered include design; construction; testing; operation and maintenance; and decommissioning. Basic principles are discussed and clear guidance on regulations is provided, in a way that will prove useful to both engineers and students.

D. Alkazraji

Upon Request

1,230 KB

Subsea Pipeline Pig Tracking

This paper establishes the requirements for subsea pipeline pig tracking and examines available principles and their limitations. It follows the selection of acoustic ranging methods and describes current procedures and outlines possible future developments and applications.

R. Kelso RIDDELL A

Upon request

50 KB

Valves Piping and Pipelines handbook

The book will provide engineers with all information they may require when operating the hull systems including valves and piping, conducting their routine maintenance and repairs. It may definitely be treated as a very timely reference source to be used when selecting the appropriate pipes and valves and applying them. The recent decades have shown serious development in valve application.

ELSEVIER

Upon Request

34,548 KB