Design Review Details

API 2C - Offshore Pedestal-mounted Cranes

API Specification 2C, 8th Edition, Offshore Pedestal-mounted Cranes, incorporates two new design methodologies related to structural considerations and subsea lifting. API Spec 2C is also part of API’s Monogram program, which certifies the manufacturing process for select products used by the industry.

API

Upon Request

518 KB

API RP 2A - Planning Designing, and Constructing Fixed Offshore Platforms - Working Stress Design

This recommended practice is based on global industry best practices and serves as a guide for those who are concerned with the design and construction of new fixed offshore platforms and for the relocation of existing platforms used for the drilling, development, production, and storage of hydrocarbons in offshore areas

API

Upon Request

2,558 KB

AWS D1.1 - Structural Welding Code - Steel

The New D1.1 spells out the requirements for design, procedures, qualifications, fabrication, inspection and repair of steel structures made of tubes, plate and structural shapes that are subject to either static or cyclic loading. Editorial changes to the text and commentary have been undertaken in the D1.1:2015 edition to improve clarity and understanding of the provisions of the code.

AWS

Upon Request

25,140 KB

AWS D1.2 - Structural Welding Code - Aluminum

This code covers the welding requirements for any type structure made from aluminum structural alloys, except for aluminum pressure vessels and pressure piping. Clauses 1 through 8 constitute a body of rules for the regulation of welding in aluminum construction. A commentary on the code is also included with the document.

AWS

Upon Request

1,619 KB

AWS D1.3 - Stractural Welding Code - Sheet Steel

This code covers the requirements associated with welding sheet steel having a minimum specified yield point no greater than 80 ksi [550 MPa]. The code requirements cover any welded joint made from the commonly used structural quality low carbon hot rolled and cold rolled sheet and strip steel with or without zinc coating (galvanized). Clause 1 includes general provisions, Clause 4 design, Clause 5 prequalification, Clause 6 qualification, Clause 7 fabrication, and Clause 8 inspection.

AWS

Upon Request

1,245 KB

AWS D1.4 - Stractural Welding Code - Steel Reinforcing Bars

This code covers the requirements for welding steel reinforcing bars in most reinforced concrete applications. It contains a body of rules for the regulations of welding steel reinforcing bars and provides suitable acceptance criteria for such welds.

AWS

Upon Request

1,251 KB

AWS D1.5 - Bridge Welding Code

This code covers the welding requirements for welded bridges made from carbon and low-alloy constructional steels and designed to AASHTO or AREMA requirements. This 2020 edition contains dimensions in metric SI Units and U.S. Customary Units. Clauses 1 through 9 constitute a body of rules for the regulation of welding in steel construction.

AWS

Upon Request

3,106 KB

AWS D1.6 - Structural Welding Code - Stainless Steel

AWS D1.6/D1.6M:2017 contains welding requirements for the fabrication, assembly, and erection of welded structures and weldments subject to design stress where at least one of the materials being joined is stainless steel. The code is intended to be used for base metals with a minimum thickness of 1/16 in [1.5 mm] or 16 gage. It shall be used in conjunction with any complementary code or specification for the design or construction of stainless-steel structures and weldments.

AWS

Upon Request

3,338 KB

AWS D1.8 - Structural Welding Code - Seismic Supplement

This document supplements the requirements to the D1.1/D1.1M Structural Welding Code as it relates to seismic provisions. It is intended to cover common applications to welded joints in Seismic Force Resisting Systems designed in accordance with the American Institute of Steel Construction, Inc. Seismic Provisions.

AWS

Upon Request

3,733 KB

AWS D1.9 - Structural Welding Code - Titanium

This code covers the requirements for design and welding of any type of titanium structure. Titanium pressure vessels and fluid-carrying pipelines are specifically excluded. Clauses 1 through 5 and Annex A constitute a body of rules for the regulation of welding in titanium construction. A commentary on the code is also included with the document.

AWS

Upon Request

1,074 KB

AWS D9.1- Sheet Metal Welding Code

This code covers the arc and braze welding requirements for nonstructural sheet metal fabrications using the commonly welded metals available in sheet form. Requirements and limitations governing procedure and performance qualification are presented, and workmanship and inspection standards are supplied. The informative annexes provide useful information on materials and processes.

AWS

Upon Request

1,462 KB

BS 7191 - Weldable Structure Steels For Fixed Offshore Structures

BS 7191 - Specification for Weldable Structural Steels for Fixed Offshore Structures Plates, sections and seamless tubulars with minimum yield strengths up to 450 N/mm2 and impact properties down to -40 °C

BS

Upon Request

1,800 KB

BS EN 1090-3 - Execution of Steel Structures and Aluminum Structures

This document specifies requirements for the execution of aluminum structural components and structures made from: a) rolled sheet, strip and plate; b) extrusions; c) cold drawn rod, bar and tube; d) forgings; e) castings.

BS

Upon Request

2,090 KB

BS EN ISO 19901-1 - Specific Requirements for Offshore Structures - Part 1 - Metocean Design and OPerating Considarations

ISO 19901-1:2015 gives general requirements for the determination and use of meteorological and oceanographic (metocean) conditions for the design, construction and operation of offshore structures of all types used in the petroleum and natural gas industries.

BS

Upon Request

8,418 KB

BS EN ISO 19901-2 - Specific Requirements for Offshore Structures - Part 2

ISO 19901-2:2017 contains requirements for defining the seismic design procedures and criteria for offshore structures; guidance on the requirements is included in Annex A. The requirements focus on fixed steel offshore structures and fixed concrete offshore structures. The effects of seismic events on floating structures and partially buoyant structures are briefly discussed.

BS

Upon Request

6,084 KB

BS EN ISO 19901-3 - Specific Requirements For Offshore Structures - Part 3

gives requirements for the design, fabrication, installation, modification and structural integrity management for the topsides structure for an oil and gas platform. applies to structural components including the following: •primary and secondary structure in decks, module support frames and modules; •flare structures; •crane pedestal and other crane support arrangements;

BS

Upon Request

1,703 KB

BS EN ISO 19901-4 - Specific Requirements For Offshore Structures - Part 4

- ISO 19901-4:2016 contains provisions for those aspects of geoscience and foundation engineering that are applicable to a broad range of offshore structures, rather than to a particular structure type. Such aspects are: - site and soil characterization; - identification of hazards; - design and installation of shallow foundations supported by the seabed; - design and installation of pile foundations; - soil-structure interaction for auxiliary structures,

BS

Upon Request

2,922 KB

BS EN ISO 19901-5 -Specific Requirements For Offshore Structures - Part 5

specifies requirements for controlling the weight and centre of gravity (CoG) by means of mass management during the engineering and construction of structures for the offshore environment. The provisions are applicable to offshore projects that include structures of all types (fixed and floating) and materials.

BS

Upon Request

518 KB

BS EN ISO 19901-6 - Specific Requirements For Offshore Structures - Part 6

specifies requirements for controlling the weight and center of gravity (CoG) by means of mass management during the engineering and construction of structures for the offshore environment. The provisions are applicable to offshore projects that include structures of all types (fixed and floating) and materials.

BS

Upon Request

871 KB

BS EN ISO 19901-8 - Specific Requirements For Offshore Structures - Part 8

specifies requirements and provides recommendations and guidelines for marine soil investigations regarding a) objectives, planning and execution of marine soil investigations; b) deployment of investigation equipment; c) drilling and logging; d) in situ testing; e) sampling; f) laboratory testing; and g) reporting. Rock materials are only covered by ISO 19901-8 to the extent that ordinary marine soil investigation tools can be used,

BS

Upon Request

1,194 KB

BS EN ISO 19901-9 - Specific requirements for offshore structures - Part 9

This document specifies principles for the structural integrity management (SIM) of offshore structures subjected to known or foreseeable types of actions. This document specifies requirements and provides recommendations applicable to the types of fixed steel offshore structures for the petroleum and natural gas industries

BS

Upon Request

2,000 KB

Design of Steel Structures to Eurocodes

This textbook describes the rules for the design of steel and composite building structures according to Eurocodes, covering the structure as a whole, as well as the design of individual structural components and connections.

Ioannis Vayas John Ermopoulos George Ioannidis

Upon Request

12,358 KB

Design of Steel Structures

This book provides an extensive coverage of the design of steel structures in accordance with the latest code of practice for general construction in steel. The text is based on the modern limit states approach to design and covers areas such as the properties of steel, types of steel structures, important areas of structural steel technology, bolted connections, welded connection, design of trusses, design of plate girders, and design of beam columns.

Subramanian

Upon Request

31,951 KB

Design of welded steel structures - principles and practice-CRC Press

Design of Welded Steel Structures: Principles and Practice provides a solid foundation of theoretical and practical knowledge necessary for the design of welded steel structures. The book begins by explaining the basics of arc welding, describing the salient features of modern arc welding processes as well as the types and characteristics of welded joints, their common defects, and recommended remedial measures.

Utpal K. Ghosh

Upon Request

3,965 KB

Design procedure for steel frame structure according to BS 5950

Structural design is grossly abbreviated name of an operation, which for major projects may involve the knowledge of hundreds of experts from a variety of disciplines. A code of practice may therefore be regarded as a consensus of what is considered acceptable at the time it was written, containing a balance between accepted practice and recent research presented in such a way that the information should be of immediate use to the design engineer.

N/A

Upon Request

235 KB

DNVGL-RP-C301 - Design, fabrication, operation and qualification of bonded repair of steel structure

The scope of this RP covers design, materials, structural analysis, fabrication, testing, in-service inspection and maintenance of bonded repairs. Aspects relating to documentation, verification and quality control are also addressed.

DNV-GL

Upon Request

1,122 KB

ISO 19902 - Steel Structure Acceptance criteria

This Paper Covers and identifies the acceptance criteria according to ISO 19902

ISO

Free

166 KB

ISO 19902 - Steel Structure Acceptance criteria

This Paper Covers and identifies the acceptance criteria according to ISO 19902

ISO

Free

111 KB

Structural Steel Design to Eurocode 3 and AISC Specifications

The book covers appropriate theoretical and background information, followed by a more design‐oriented coverage focusing on European and United States specifications and practices, allowing the reader to directly compare the approaches and results of both codes.

Claudio Bernuzzi, Benedetto Cordova

Upon Request

11,014 KB

Tubular Steel Structures - Theory and Design

Tubular Steel Structures presents guidelines for the structural analysis and design of thin-walled, large-diameter tubular structures, principally stacks, bins, horizontal storage tanks, pipelines and conveyor galleries. Dr. Trotsky presents the material systematically in 12 chapters, addressing such problems as edge effect and buckling stability. Derivations of equations, analysis, and formulas are also included. Recently revised.

Mr. Troitsky

Upon Request

28,506 KB

Typical Welding Procedure Specifications for Structure Steelwork

This document is intended for use by steelwork contractors, welding engineers and inspectors, and those actively involved in welding and welding technology. Familiarity with BS EN ISO 15614, BS EN 287, and the welding principles contained in BS EN 1011 is required. Structural capacity checking and weld inspection are not addressed in this document.

Mr Jeff Garner Mr Johann Krancioch Mr Richard Thomas Dr David Moore Mr David Brown

Upon Request

2,131 KB

weldability and structure steels

Lecture outline • Carbon equivalent and weldability • Impact properties • Structural steels (A36 specification)

N/A

Free

305 KB