Heat Treatment Details

ASM HandBook - Vol 04 - Heat Treating

Volume 4 has been organized into eight major sections: heat treating of steel, surface hardening of steel, heat-treating equipment, process and quality control considerations, heat treating of cast irons, heat treating of tool steels, heat treating of stainless steels and heat-resistant alloys, and heat treatment of nonferrous alloys. A total of 71 articles are contained in these sections--16 new, 17 completely rewritten, and the remainder revised and/or expanded.

ASM

Upon Request

23,849 KB

ASME B31P - Standard Heat Treatments For Fabrication Processes

This Standard provides requirements for heat treatment of piping assemblies that meet the requirements of ASME B31 Code Sections. These requirements apply to:  preheating; postweld heat treatment (PWHT); postforming heat treatment (PFHT) required by the ASME B31 Code Sections for other fabrication processes, including forming processes such as bending; and heat treatments required by contract specifications.

ASME

Upon Request

938 KB

AWS D10.10 - Recomended Practice For Local Heating of Welds in Piping and Tubing

This standard provides information on recommended practices, equipment, temperature control, insulation, and advantages and disadvantages for the methods presently available for local heating of welded joints in pipe and tubing.

AWS

Upon Request

5,481 KB

Basic Heat Treatment

When you have completed this chapter, you will be able to do the following: 1. Describe the heat treatment theory. 2. Identify the stages of heat treatment. 3. Recognize heating colors associated with steel. 4. Describe the different types of heat treatment. 5. Describe the different types of quenching media.

N/A

Upon Request

2,786 KB

BS EN 1011-1 - Welding - Recommendations For Welding Of Metallic Materials

"This European Standard contains general guidance for the arc welding of metallic materials in all forms of product (e.g. cast, wrought, extruded, forged). The processes and techniques referred to in this Part of EN 1011 may not all be relevant to all materials. Additional information relevant to specific materials is given in the relevant Parts of the Standard."

BS

Upon Request

350 KB

BS EN 1011-2 - Welding - Recommendations For Welding Of Metallic Materials

This European Standard gives guidance for manual, semi-mechanised, mechanised and automatic arc welding of ferritic steels(see clause 5), excluding ferritic stainless steels, in all product forms.

BS

Upon Request

603 KB

BS EN 1011-3 - Welding - Recommendations For Welding Of Metallic Materials

This European Standard gives general recommendations for the fusion welding of stainless steels. Specific details relevant to austenitic, austenitic-ferritic, ferritic and martensitic stainless are given in annexes A to D.

BS

Upon Request

194 KB

Handbook of Heat Treatment of Steels

the book presents the principles, methods and practices of heat treatment of steels, associated furnaces, and other equipments and applications. The various types of steels are discussed along with the heat treatment operations for each type.

K H Prabhudev

Upon Request

21,950 KB

Heat Treatment Annealing

This Presentation covers the various types of heat treatment and its affect on the material and the proper method to be conducted

N/A

Upon Request

160 KB

Heat Treatment ASME Sec VIII Div. (1)

This Presentation covers the Post Weld Heat Treatment and its affect on the material and the proper method to be conducted as per ASME sec VIII Div (1)

N/A

Upon Request

676 KB

Heat Treatment of Metals

This Presentation covers the various types of heat treatment and its affect on the material and the proper methode to be conducted

N/A

Upon Request

2,907 KB

Heat Treatment of Steel

This Presentation covers the various types of heat treatment and its affect on the material and the proper methode to be conducted

N/A

Upon Request

1,031 KB

Heat Treatment Of Steels and Quality Control

This book covers : Phases and Structures, Pearlite, Ferrite and Cementite, Martensite and Bainite, Isothermal and Continuous Cooling Transformation Diagrams, Heat Treatments Producing Ferrite and Pearlite, Hardness and Hardenability, Tempering of Steels, Special Heat Treatments, Surface Hardening, Stainless Steel& Tool Steels

Dr. Hamdy A-E YOUSEF

Upon Request

6,206 KB

ISO 13916 - Wedng - Measurement Of Preheating Temperature, Interpass Temperature, and Preheat Maintnance Temperature

ISO 13916:2017 specifies requirements for the measurement of preheating temperature, interpass temperature and preheat maintenance temperature for fusion welding. ISO 13916:2017 can also be applied as appropriate in the case of other welding processes. ISO 13916:2017 does not cover the measurement of post weld heat treatment temperatures.

ISO

Upon Request

132 KB

ISO 17663 - Welding - Quality required for Heat Treatment In Connection With Welding and Allied Processes

"ISO 17663:2009 provides quality requirements for heat treatment in air or controlled atmospheres carried out in workshops and on site in connection with welding and forming. It applies mainly to ferritic steels, but can be used for other materials, as appropriate.

ISO

Upon Request

103 KB

PVP - 65856 - Computational Fluid Dynamics (CFD) Provides Alternative To Conventional Heat Treatment Guidelines

The present study was completed in two phases . The first phase calibrate d the CFD models using temperature measurements obtained from experiments conducted on two different diameter and schedule pipes with several heating band configurations. In this phase, the thermal contact resistance between heating bands and pipe wall was tuned to match computed temperatures to measured results.

Cole Davis & Gregory W. Brown, PhD

Upon Request

558 KB

Steel Heat Treatment Handbook - Steal Heat Treatment Metallurgy and Technologies

Steel Heat Treatment: Metallurgy and Technologies presents the principles that form the basis of heat treatment processes while incorporating detailed descriptions of advances emerging since the 1997 publication of the first edition.

George E. Totten

Upon Request

6,045 KB

Welding Research Council Bulletin - Recommended Practice For Local Heating Of Welds In Pressure Vessels

The framework for this document is based upon the American Welding Society ANSI/AWS D10.10-90, Recommended Practices for Local Heating of Welds in Piping and Tubing. During the process of revising this AWS document, it was recognized that it might be more appropriate to prepare a separate document pertaining recommended practices for local heating of welds in pressure vessels.

Joseph W. MCEnemey & Pingsha Dong

Upon Request

4,557 KB