Mechanical Tests Details

ASM - Handbook - Vol 08 - Mechanical Testing and Evaluation

the scope of coverage has been broadened to include the mechanical testing of alloys, plastics, ceramics, composites, and common engineering components such as fasteners, gears, bearings, adhesive joints, and welds. This new scope is also complemented by substantial updates and additions in the coverage of traditional quasi-static testing, hardness testing, surface testing, creep deformation, high strain rate testing, fracture toughness, and fatigue testing.

ASM

Upon Request

49 KB

ASM - Tensile Testing

The results of tensile tests are used in selecting materials for engineering applications. Tensile properties frequently are included in ma- terial specifications to ensure quality. Tensile properties often are measured during develop- ment of new materials and processes, so that dif- ferent materials and processes can be compared. Finally, tensile properties often are used to pre- dict the behavior of a material under forms of loading other than uniaxial tension.

ASM

Upon Request

201 KB

ASME - A Quick Guide to Welding and Weld Inspection

This book’s subjects are purposely not covered in great detail because it is assumed that the reader is able to find detailed books on specific subject areas of particular interest. What this book will do is give you a basic understanding of the subject and so help you decide if you need to look further. In many cases the depth of knowledge required for any particular welding-related subject will be dependent on specific industry requirements.

Steven Hughes

Upon Request

1,756 KB

ASTM - A1058 - Standard Test Methods for Mechanical Testing of Steel Products - Metric

These test methods cover mechanical tests described in ASTM, EN,2 ISO,3 and JIS4 standards that utilize the SI system of units. The test methods in each system are not exact equivalents. Each standards system (ASTM, EN, ISO, and JIS) shall be used independently of the other. Combining require- ments from any two or more systems may result in noncon- formance with the purchase order.

ASTM

Upon Request

38 KB

ASTM - A370 - Standard Test Methods and Definations for Mechanical Testing of Steel Products

These test methods2 cover procedures and definitions for the mechanical testing of steels, stainless steels, and related alloys. The various mechanical tests herein described are used to determine properties required in the product specifications. Variations in testing methods are to be avoided, and standard methods of testing are to be followed to obtain reproducible and comparable results.

ASTM

Upon Request

40 KB

ASTM - E10 - STandard Test Method for Brinell Hardness of Metalic Materials

This test method covers the determination of the Brinell hardness of metallic materials by the Brinell indentation hardness principle. This standard provides the requirements for a Brinell testing machine and the procedures for performing Brinell hardness tests.

ASTM

Upon Request

40 KB

ASTM - E110-14 - Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Protable Hardness Tester

This test method defines the requirements for portable instruments that are intended to be used to measure the Rockwell or Brinell hardness of metallic materials by perform- ing indentation tests on the surface of materials in the field or outside of a test lab, or in cases where the size or weight of the test piece prevents it from being tested on a standard E10 or E18 hardness tester.

ASTM

Upon Request

30 KB

ASTM - E140 - Standard Hardness Conversion Tables for Metals

ASTM E140 is a standard reference that provides tables for converting hardness measurements between different scales for metallic materials. The standard provides a relationship between five different hardness scales, namely Brinell, Vickers, Rockwell, Knoop, and Scleroscope hardness.

ASTM

Upon Request

32 KB

ASTM - E18-20 - Standard Test Methods for Rockwell Haedness of Metallic Materials

These test methods cover the determination of the Rockwell hardness and the Rockwell superficial hardness of metallic materials by the Rockwell indentation hardness prin- ciple. This standard provides the requirements for Rockwell hardness machines and the procedures for performing Rock- well hardness tests.

ASTM

Upon Request

40 KB

ASTM - E23 - Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

These test methods describe notched-bar impact testing of metallic materials by the Charpy (simple-beam) test and the Izod (cantilever-beam) test. They give the requirements for: test specimens, test procedures, test reports, test machines verifying Charpy impact machines, optional test specimen configurations, desig- nation of test specimen orientation, and determining the percent of shear fracture on the surface of broken impact specimens.

ASTM

Upon Request

35 KB

ASTM - E23 - Standard Testing Methode For Notched Bar Impact Testing of Metallic Materials

These test methods describe notched-bar impact testing of metallic materials by the Charpy (simple-beam) test and the Izod (cantilever-beam) test. They give the requirements for: test specimens, test procedures, test reports, test machines verifying Charpy impact machines, optional test specimen configurations, desig- nation of test specimen orientation, and determining the shear fracture appearance.

ASTM

Upon Request

33 KB

ASTM - E23-18 - Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

These test methods describe notched-bar impact testing of metallic materials by the Charpy (simple-beam) test and the Izod (cantilever-beam) test. They give the requirements for: test specimens, test procedures, test reports, test machines verifying Charpy impact machines, optional test specimen configurations, desig- nation of test specimen orientation, and determining the shear fracture appearance.

ASTM

Upon Request

33 KB

ASTM - E340 - Standard Test Method for Metals and alloys

1.1 These test procedures describe the methods of mac- roetching metals and alloys to reveal their macrostructure.

ASTM

Upon Request

27 KB

ASTM - E384 -17 - Standard Test Method for Microindentation of Materis

This test method covers determination of the microindentation hardness of materials.

ASTM

Upon Request

47 KB

ASTM - E407 - Standard Practice for Microetching Metals and alloys

This practice covers chemical solutions and procedures to be used in etching metals and alloys for microscopic examination. Safety precautions and miscellaneous informa- tion are also included.

ASTM

Upon Request

31 KB

ASTM - E436-03 - Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels

This test method covers drop-weight tear tests (DWTT) on ferritic steels with thicknesses between 3.18 and 19.1 mm.

ASTM

Upon Request

23 KB

ASTM - E8-E8M - Standard Test Methods for Tension Testing of Metallic Materials

These test methods cover the tension testing of metallic materials in any form at room temperature, specifically, the methods of determination of yield strength, yield point elongation, tensile strength, elongation, and reduction of area.

ASTM

Upon Request

36 KB

ASTM - E92-17 - Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials

These test methods cover the determination of the Vickers hardness and Knoop hardness of metallic materials by the Vickers and Knoop indentation hardness principles. This standard provides the requirements for Vickers and Knoop hardness machines and the procedures for performing Vickers and Knoop hardness tests.

ASTM

Upon Request

36 KB

AWS - B4.0 - Standard Methods for Mechanical Testing of Welds

Mechanical test methods that are applicable to welds and welded joints are described. For each testing method, informa- tion is provided concerning applicable American National Standards Institute (ANSI), American Society for Testing and Materials (ASTM), and American Petroleum Institute (API) documents; the required testing apparatus, specimen prepa- ration, procedure to be followed, and report requirements are also described.

AWS

Upon Request

131 KB

AWS - Welding Inspection Handbook

"The objective is to provide a reliable source of useful reference information. This is particularly relevant for the technically trained individual who may not be directly involved with inspection but whose position requires knowledge about welding inspection. This book also is intended for the inspector who needs a general refresher in the basic requirements of weld inspection.

AWS

Upon Request

203 KB

BS - EN ISO 148-1 - Metallic Materials - Charpy Pendulum Impact Test

This document is a PDF containing a Tracked Changes version of BS EN ISO 148-1, which compares BS EN ISO 148-1:2016 with BS EN ISO 148-1:2010. The original version of BS EN ISO 148-1:2016, appended at the end of this document, should be considered the version of record for this publication.

BSI

Upon Request

601 KB

BS - EN ISO 17639 - Destructive Tests on Welds in Metallic Materials - Macroscopic and Microscopic Examination of welds

This International Standard gives recommendations for specimen preparation, test procedures and their main objectives for macroscopic and microscopic examination.

BSI

Upon Request

405 KB

EN ISO 9015-1 - Destructive tests on welds in metallic materials - Hardness testing - Part 1 Hardness test on arc welded joints

This part of ISO 9015 specifies hardness tests on transversesections of arcwelded joints of metallic materials.It coversVickers hardnesstests in accordancewith ISO6507-1,normallywith test loads of 49,03 Nor98,07N(HV5 or HV 10).

ISO

Upon Request

91 KB

ISO 148-1 - Metallic Materials - Charpy Pendulum Impact Test - Part 1 - Test Method

This part of ISO 148 specifies the Charpy (V-notch and U-notch) pendulum impact test method for determining the energy absorbed in an impact test of metallic materials. This part of ISO 148 does not cover instrumented impact testing, which is specified in ISO 14556.

ISO

Upon Request

114 KB

ISO 148-2 - Metallic Materials - Charpy Pendulum Impact Test - Part 2 - Verification of Testing Machines

This part of ISO 148 covers the verification of pendulum-type impact testing machines, in terms of their constructional elements, their overall performance and the accuracy of the results they produce. It is applicable to machines with 2 mm or 8 mm strikers used for pendulum impact tests carried out, for instance, in accordance with ISO 148-1.

ISO

Upon Request

102 KB

ISO 148-3 - Metallic Materials - Charpy Pendulum Impact Test - Part 3

This part of ISO 148 specifies the requirements, preparation and methods for qualifying test pieces used for the indirect verification of pendulum impact testing machines in accordance with ISO 148-2.

ISO

Upon Request

108 KB

ISO 17639 - Destructive Tests on Welds in Metallic Materials - Macroscopic and Microscopic Examination of Welds

This International Standard gives recommendations for specimen preparation, test procedures and their main objectives for macroscopic and microscopic examination.

ISO

Upon Request

67 KB

ISO 4136 - Destructive Tests on Welds in Metacllic Materials - Transverse Tensile Test

This International Standard specifies the sizes of test specimen and the procedure for carrying out transverse tensile tests in order to determine the tensile strength and the location of fracture of a welded butt joint.

ISO

Upon Request

86 KB

ISO 5173 - Desteuctive Tests on Welds in Metallic Materials - Bend Tests

his International Standard specifies a method for making transverse root, face and side bend tests on test specimens taken from butt welds, butt welds with cladding (subdivided into welds in clad plates and clad welds) and cladding without butt welds, in order to assess ductility and/or absence of imperfections on or near the surface of the test specimen. It also gives the dimensions of the test specimen.

ISO

Upon Request

55 KB

ISO 6892-1 - Metallic-Materials - Tensile Testing - Part 1 - Method of test at Room Temperature

This part of ISO 6892 specifies the method for tensile testing of metallic materials and defines the mechanical properties which can be determined at room temperature.

ISO

Upon Request

80 KB