Design Review Details

ANSI-ASME - ASME B 31.3 (Petrochemical & Oil Refineries) & ASME B 31.1 (Power Plant)

This presentation provides a comparison between ANSI/ASME B31.1 - power piping & ANSI/ASME B31.3 process piping

N/A

Free

775 KB

ASME B16.5 - Pipe Flanges and Flanged Fittings

This Standard is to be used in conjunction with equipment described in other volumes of the ASME B16 Series of Standards as well as with other ASME standards, such as the Boiler and Pressure Vessel Code and the B31 Piping Codes. Careful application of these B16 Standards will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes.

ASME

Upon Request

3,126 KB

ASME B31.1 - ASME Code For Pressure Piping

ASME B31.1 prescribes minimum requirements for the design, materials, fabrication, erection, test, examination, inspection, operation, and maintenance of piping systems typically found in electric power generating stations, industrial and institutional plants, geothermal heating systems, and central and district heating and cooling systems.

ASME

Upon Request

3,366 KB

ASME B31.3 - Procass Piping - ASME Code For Pressure Piping

ASME B31.3 contains requirements for piping typically found in petroleum refineries; chemical, pharmaceutical, textile, paper, semiconductor, and cryogenic plants; and related processing plants and terminals. It covers materials and components, design, fabrication, assembly, erection, examination, inspection, and testing of piping.

ASME

Upon Request

1,713 KB

Best Practical Manual - Fluid Piping Systems

"This guidebook covers the best practices in piping systems with a primary view of reducing energy cost, keeping in mind the safety and reliability issues. The basic elements of best practice in piping systems are: 1. Analysis & optimum pipe size selection for water, compressed air and steam distribution systems 2. Good piping practices 3. Thermal insulation of piping system"

Devki Energy Consultancy Pvt. Ltd.,

Upon Request

474 KB

EEMUA 185 - Guide For Hot Tapping on Piping and Other Equipment

This Publication applies to hot tapping into metallic piping systems containing process fluids or their residues. Additionally, information is provided for special hot tapping applications such as on storage tanks. It covers the welding and cutting (drilling/trepanning) operations and other technical considerations, and gives guidance on how to carry out a safe operation.

EEMUA

Upon Request

549 KB

Facility Piping System Handbook

gives you a complete design guide and reference for all piping systems, including those in laboratories, and health care facilities. This new edition includes metric units throughout; updated codes and standards; and new material on flow level measurement, drinking water systems, septic systems, and hot water circulating systems. You’ll also find helpful material on pipe space requirements and fixture mounting heights. Complete with formulas, charts, and tables that increase your on-the-job efficiency

Michael Frankel, CPD

Upon Request

8,348 KB

Flow of Fluids - Through Valves, Fittings and Pipe - Metric Edition

Crane Technical Paper No. 410 (TP-410) is the quintessential guide to understanding the flow of fluid through valves, pipe and fittings, enabling you to select the correct equipment for your piping system. Originally developed in 1942, the latest edition of Crane TP-410 serves as an indispensable technical resource for specifying engineers, designers and engineering students. TP-410 is authored by Crane Valve Group (CVG), one of the world's leading suppliers of valve products and services.

CRANE Co.

Upon Request

3,850 KB

Heat Pipes

A comprehensive, up-to-date coverage of the theory, design and manufacture of heat pipes and their applications. This latest edition has been thoroughly revised, updated and expanded to give an in-depth coverage of the new developments in the field. Significant new material has been added to all the chapters and the applications section has been totally rewritten to ensure that topical and important applications are appropriately emphasized.

P. D. Dunn

Upon Request

10,427 KB

Industrial Piping and Equipment Estimating Manual

"Industrial Piping and Equipment Estimation Manual delivers an invaluable resource for day-to-day operations. Packed full of worksheets covering combined and simple cycle power plants, refineries, compressor stations, ethanol, hydrogen and biomass plants, this reference helps the construction engineer and estimator learn how to create bids where scope and quantity differences can be identified, and project impacts estimated.

Kenneth Storm

Upon Request

1,592 KB

Oil and Gas Pipelines and Piping Systems

Oil and Gas Pipelines and Piping Systems: Design, Construction, Management, and Inspection delivers all the critical aspects needed for oil and gas piping and pipeline condition monitoring and maintenance, along with tactics to minimize costly disruptions within operations. Broken up into two logical parts, the book begins with coverage on pipelines, including essential topics, such as material selection, designing for oil and gas central facilities, tank farms and depots,

Alireza Bahadori, PhD, CEng, MIChemE, CPEng, MIEAust, RPEQ

Upon Request

10,378 KB

Overview Of Process Plant Piping System Design

This presentation provides an overview of process plant piping system design

Vincent A. Carucci

Upon Request

244 KB

P&IDs - Piping and Instrument Diagrams

The objective of this presentation is to allow you to understand what a P&ID is, the information and details it provides, the industry standard symbols which are used (ISA), How the P&ID is utilized by (The client, plant personnel), Honeywell IAC & How the P&ID works with loop diagrams

Michael Sharpe

Upon Request

331 KB

Pipe Fitting and Piping Handbook

meant to be used as a reference companion for those piping drafters and designers and engineers and pipe fitters who continually need a quick and comprehensive guide on the job or in the classroom.

Louis Gart Lamit

Upon Request

6,340 KB

Piping and Pipe Support Systems: Design and Engineering

the book is detailed enough for the seasoned professional, yet easy enough for the novice to understand. In it, the design criteria, codes, standards, and regulations are explained for power piping, fuel gas piping, chemical plant and refining piping, liquid petroleum transportation piping systems, refrigeration piping, gas transmission and distribution piping, building service piping, and nuclear power piping.

Paul R. Smith

Upon Request

16,162 KB

Piping and Pipeline Calculations Manual

Piping and Pipeline Calculations Manual is a "no nonsense" guide to the principal intentions of the codes or standards and provides advice on compliance. After using this book, the reader should come away with a clear understanding of how piping systems fail and what the code requires the designer, manufacturer, fabricator, supplier, erector, examiner, inspector, and owner to do to prevent such failures.

J. Phillip Ellenberger

Upon Request

5,967 KB

Piping and Pipeline Engineering - Design, Construction, Maintenance, Integrity, and Repair

The book includes coverage of codes and standards, design analysis, welding and inspection, corrosion mechanisms, fitness-for-service and failure analysis, and an overview of valve selection and application. It features the technical basis of piping and pipeline code design rules for normal operating conditions and occasional loads and addresses the fundamental principles of materials, design, fabrication, testing and corrosion, and their effect on system integrity.

George A.Antaki

Upon Request

2,063 KB

Piping and Pipelines Assessment Guide

This series, the most comprehensive of its kind, uses real-life examples and time-tested rules of thumb to guide the mechanical engineer through issues of reliability and fitness-for-service. This volume on piping and pipeline assessment is the only handbook that the mechanical or pipeline engineer needs to assess pipes and pipelines for reliability and fitness-for-service.

A. Keith Escoe

Upon Request

4,796 KB

Piping And Piping Components Converted

This Presentation Covers: Piping, Piping components and valves & gaskets

N/A

Free

72 KB

Piping Calculations Manual

This book covers piping calculations for liquids and gases in single phase steady state flow for various industrial applications. Pipe sizing and capacity calculations are covered mainly with additional analysis of strength requirement for pipes. The calculation manual approach has been found to be very successful and I want to thank Ken McCombs of McGraw-Hill for suggesting this format.

E. Shashi Menon, P.E.

Upon Request

2,978 KB

Piping Design Workbook

The Piping Design Workbook is designed as an aid for students attending the PDS 3-D Piping Design Training Course presented by Intergraph Corporation Education Center and is a supplement to the standard product documentation. This workbook is structured according to the course outline and is not intended to serve as a comprehensive reference.

N/A

N/A

1,102 KB

Piping Design

This book covers the piping design

N/A

Upon Request

23,062 KB

Piping Draft and Design

Pipe Drafting and Design, is a tried and trusted guide to the terminology, drafting methods, and applications of pipes, fittings, flanges, valves, and more. Those new to this subject will find no better introduction on the topic, with easy step-by-step instructions, exercises, review questions, hundreds of clear illustrations, explanations of drawing techniques, methodology and symbology for piping and instrumentation diagrams, piping arrangement drawings and elevations, and piping isometric drawings.

Roy A. Parisher • Robert A. Rhea

Upon Request

13,990 KB

Piping Engineering Leadership - For Process Plant Projects

James O. Pennock has compiled 45 years of personal experience into this how-to guide. Focusing on the position of "lead in charge," this book is an indispensable resource for anyone, new or seasoned veteran, whose job it is to lead the piping engineering and design of a project.

James O. Pennock

Upon Request

473 KB

Piping Handbook

The revised version of this work presents comprehensive information on current pipe design practice, material application, and industry standards. Among the subjects covered are the basics of design, the various types of piping systems, and the use of thermoplastics and fiberglass.

Mohinder L. Nayyar

Upon Request

14,803 KB

Piping Joints Handbook

This booklet has been written as an introduction to and a source of general information on pipe joints. The purpose of this booklet is therefore to increase understanding about pipe joints; from pipe specifications and how to use them, to stud bolts and how to identify them. With increased awareness and knowledge, it is expected that mistakes will be prevented.

BP AMOCO

Upon Request

377 KB

Piping Materials Guide - Selection & Applications

This book covers the entire piping process, including the selection of piping materials according to the job, the application of the materials and fitting, trouble-shooting techniques for corrosion control, inspections for OSHA regulations, and even the warehousing, distributing, and ordering of materials. There are books on materials, fitting, OSHA regulations, and so on, but this is the only "one stop shopping" source for the piping engineer on piping materials.

PETER SMITH

Upon Request

2,776 KB

Piping System Design I - Piping Components, Materials, Codes and Standards - Part 1 - pipe

this presentation covers piping components, material, codes & standards

Alireza Niakani

Upon Request

1,604 KB

Piping System Manual

Piping Systems Manual is a hands-on design and engineering resource that explains the reasons behind the designs. You will get full coverage of materials, components, calculations, specifications, safety, and much more. Hundreds of detailed illustrations make it easy to understand the best practices presented in the book.

Brian Silowash, PE, CEM, LEED AP,

Upon Request

4,944 KB

Piping Systems & Pipeline ASME B31 Code Simplified

The Piping Systems & Pipeline Code establishes rules of the design, inspection, maintenance and repair of piping systems and pipelines throughout the world. This book will cover such topics as: inspection techniques, from the most common (PT, MT, UT, RT, MFL pigs) to most recent (AE, PED, UT pigs and multi pigs), the implementation of integrity management programs, periodic inspections and evaluation of results

J. Phillip Ellenberger, P.E.

Upon Request

2,306 KB

Piping Training Course

Covers: - Definition - Piping Component - Piping Drawing - Design - Pipe Work - Codes & Standards

N/A

Free

15,224 KB

Plastic Piping Handbook

The purpose of this handbook is to provide accurate and reliable information concerning the application, design, and installation of plastic pipe for water and gas systems.

David Willoughby

Upon Request

1,804 KB

Plumbing Engineering Design Handbook - volume 1 - Fundamentals of Plumbing Engineering

The ASPE Plumbing Engineering Design Handbook is designed to provide accurate and authoritative information for the design and specification of plumbing systems. The publisher makes no guarantees or warranties, expressed or implied, regarding the data and information contained in this publication.

ASPE

Upon Request

4,748 KB

Plumbing Engineering Design Handbook - volume 2 - Plumping Systems

The ASPE Plumbing Engineering Design Handbook is designed to provide accurate and authoritative information for the design and specification of plumbing systems. The publisher makes no guarantees or warranties, expressed or implied, regarding the data and information contained in this publication.

ASPE

Upon Request

10,230 KB

Plumbing Engineering Design Handbook - volume 3 - Special Plumbing System

The ASPE Plumbing Engineering Design Handbook is designed to provide accurate and authoritative information for the design and specification of plumbing systems. The publisher makes no guarantees or warranties, expressed or implied, regarding the data and information contained in this publication.

ASPE

Upon Request

2,972 KB

Plumbing Engineering Design Handbook - volume 4 - Plumbing Components and Equipment

The ASPE Plumbing Engineering Design Handbook is designed to provide accurate and authoritative information for the design and specification of plumbing systems. The publisher makes no guarantees or warranties, expressed or implied, regarding the data and information contained in this publication.

ASPE

Upon Request

6,045 KB

Pocket Guide to Flanges, Fittings, and Piping Data

Here is the latest edition of a compact reference that has been a real treasure for materials personnel for more than 15 years. Packed with pictures, definitions, and descriptions of ANSI and API piping materials, such as flanges, fittings, bolts, gaskets, and required wrench sizes, it serves as an excellent guide for "rookies" and a ready reference for "old-timers" alike.

R.R. Lee

Upon Request

6,849 KB

Power Piping: The Complete Guide to the ASME B31.1

This essential new volume provides background information, historical perspective, and expert commentary on the ASME B31.1 Code requirements for power piping design and construction. It provides the most complete coverage of the Code that is available today and is packed with additional information useful to those responsible for the design and mechanical integrity of power piping.

Dr. Becht

Upon Request

14,788 KB

Practical Guide to ASME B31.3 Process Piping

This book provides a practical guide and simplification to ASME B31.3 Process piping

CASTI

Upon Request

1,199 KB

Process Piping: The Complete Guide to ASME B31.3

this edition provides background information, historical perspective, and expert commentary on the ASME B31.3 Code requirements for process piping design and construction. It provides the most complete coverage of the Code that is available today and is packed with additional information useful to those responsible for the design and mechanical integrity of process piping. The author is a long-serving member, and present Chairman, of the ASME B31.3, Process Piping Code committee.

Charles Becht

Upon Request

8,613 KB

Process Piping Design Handbook - Volume 1 - The Fundamentals of Piping Design

Written for the piping engineer and designer in the field, The Fundamentals of Piping Design is an introduction to the design of piping systems, various processes and the layout of pipe work connecting the major items of equipment for the new hire, the engineering student and the veteran engineer needing a reference.

Peter Smith

Upon Request

6,163 KB

Process Piping Design Handbook - Volume 3 - The Planning Guide T Piping Design

younger generations of engineers and designers are growing up with a much more technological view of piping design and are in need of a handbook that will explain the proven methods of planning and monitoring the piping design in step-by-step processes. This handbook will provide mentors in the process piping industries the bridge needed for the upcoming engineer and designer to grasp the requirements of piping supervision in the modern age.

Peter Smith

Upon Request

5,057 KB

Rules of Thumb For Mechanical Engineers

It assembles hundreds of shortcuts, calculations, practical "how-to" methods, and concise background reviews into one convenient volume. If you're concerned with design, selection, or performance, you'll find fast, accurate answers here - all without wading through pages of theory. You'll find easy-to-read descriptions on fluids, heat transfer, thermodynamics, seals, pumps, and compressors, drivers, gears, and bearings, as well as piping and pressure vessels.

J. Edward Pope, Editor

Upon Request

11,069 KB

Sour Service Piping Systems Material and Fabrication

This presentation covers: (Sour Service Definition & Damage Mechanisms, Material Requirements, Fabrication & Nondestructive Examination)

Society of Piping Engineers and Designers Calgary, Alberta

Upon Request

1,084 KB

The Fundamentals of Piping Design

Written for the piping engineer and designer in the field, this two-part series fills a void in piping literature, since the Rip Weaver books of the '90s were taken out of print at the advent of the Computer Aid Design (CAD) era. The Fundamentals of Piping Design is an introduction to the design of piping systems, various processes and the layout of pipe work connecting the major items of equipment for the new hire, the engineering student and the veteran engineer needing a reference.

Peter Smith

Upon Request

8,436 KB

Trenchless Technology Piping - Installation and Inspection

Trenchless Technology Piping offers comprehensive coverage of pipe installation, renewal, and replacement using trenchless technology methods. This step-by-step resource explains how to implement efficient design, construction, and inspection processes and shows how to save time and money with a state-of-the-art project management system. Packed with detailed illustrations, the book surveys the wide variety of trenchless technologies available and discusses the recommended applications for each

Dr. Mohammad Najafi

Upon Request

3,581 KB

Valves, Piping and Pipelines handbook

introduction of more valve designs capable of reliable operation in difficult fluid handling situations; low noise technology and most importantly, the increasing attention being paid to product safety and reliability. Digital technology is making an impact on this market with manufacturers developing intelligent (smart) control valves incorporating control functions and interfaces.

EL SEVIER ADVANCED TECHNOLOGY

Upon Request

34,548 KB