Material Testing Details

(EW-512-5) -Destructive Testing Methods - Training Workbook Hobart Institute of Welding Technology

The scope of this Handbook is to know the mechanical properties of metals and welds and the type of tests used to evaluate these properties.

the Staff of Hobart Institute of Welding Technology

Upon Request

2,757 KB

API SPEC 5LC - CRA Line Pipe

This specification covers seamless, centrifugal cast, and welded alloy line pipe with improved corrosion resistant properties. The purpose of this specification is to provide standards for pipe with improved corrosion resistance suitable for use in conveying gas, water, and oil in both the oil and natural gas industries.

API

Upon Request

1,669 KB

API SPEC 5LD - CRA Clad or Lined Steel Pipe

This specification covers seamless and welded clad steel line pipe and lined steel line pipe with enhanced corrosion-resistant properties suitable for use in pipeline transportation systems in the petroleum and natural gas industries.

API

Upon Request

209 KB

API SPECIFICATION for Line Pipe 5L

This Standard specifies requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of seamless and welded steel pipes for use in pipeline transportation systems in the petroleum and natural gas industries. This Standard is not applicable to cast pipe.

API

Upon Request

884 KB

ASTM A1038 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method

This test method covers the determination of comparative hardness values by applying the Ultrasonic Contact Impedance Method (UCI Method).

ASTM

Upon Request

99 KB

ASTM A370 Standard Test Method for Mechanical Testing of Steel Products

These test methods cover procedures and definitions for the mechanical testing of steels, stainless steels, and related alloys. The various mechanical tests herein described are used to determine properties required in the product specifications

ASTM

Upon Request

656 KB

ASTM A956 Standard Test Method for leeb Hardness Testing of Steel Products

This test method covers the determination of the Leeb hardness of steel, cast steel, and cast iron (Part A), including the methods for the verification of Leeb hardness testing instruments (Part B), and the calibration of standardized test blocks (Part C).

ASTM

Upon Request

129 KB

Boilers- A Practical Reference

The structure of the book is quite simple. Words are all explained alphabetically. At the same time, all words related to any particular topic are grouped together so that the entire subject matter stays intact at one place. The reader is suitably directed. This way, the reader gets the explanation for the word he is searching for and also sees all the related words and their explanations, getting to learn about the whole topic if so interested.

Kumar rayaprolu

Upon Request

9,632 KB

BS EN ISO 17639 Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds

This International Standard gives recommendations for specimen preparation, test procedures and their main objectives for macroscopic and microscopic examination.

BSI

Upon Request

446 KB

Comparative Tensile Strength and Shear Strength Of Detaclad Explosion Clad Products

A testing program has been undertaken to establish data on the interface tensile strength properties of explosion-clad plates and to compare the results with the interface shear strengths and the bulk mechanical properties of the cladding and base metal components. Results and indicative relationships are presented and discussed.

Curtis Prothe and Andy Vargo

Upon Request

136 KB

Destructive and Non-Destructive Testing of Welders Qualification

This Presentation gives an overview on the various methods used in Material Destructive Tests and testing of Welders qualifications

N/A

Free

208 KB

DIN EN Destructive tests on welds in metallic Materials

This standard specifies the methods of specimen preparation, test procedures and their main objectives for the microscopic and macroscopic examination

DIN

Upon Request

360 KB

DNVGL-OS-B101 Metallic Materials

This standard provides principles, technical requirements and guidance for metallic materials to be used in the fabrication of offshore structures and equipment.

DNVGL

Upon Request

582 KB

DNVGL-OS-C401 Fabrication and testing of offshore structures

This standard contains requirements for fabrication and testing of offshore units described in the DNV GL rules for classification of offshore units.

DNVGL

Upon Request

1,484 KB

Engineering Handbook by G.L Huyett

The following topics are covered in this Handbook: Steel Making, Metal Alloys, Heat Treatment, Testing of metals, manufacturing process and coating and painting

G.L Huyett

Upon Request

2,143 KB

Hardness Test of Materials & Welds

This Presentation gives an introduction about Hardness Testing of materials

AAIS

Free

792 KB

ISO 5173 Destructive tests on welds in metallic Materials Bend Tests

This International Standard specifies a method for making transverse root, face and side bend tests on test specimens taken from butt welds, butt welds with cladding (subdivided into welds in clad plates and clad welds) and cladding without butt welds, in order to assess ductility and/or absence of imperfections on or near the surface of the test specimen. It also gives the dimensions of the test specimen.

ISO

Upon Request

135 KB

Materials for Engineering

This textbook represents an attempt to present a relatively brief overview of Materials Science. It is in two sections – the first characterizing engineering materials, the second considering structure–property relationships

John Martin

Upon Request

1,783 KB

Materials-Processes in Manufacturing

The purpose of this book is to give design and manufacturing engineers and technicians basic information on materials, manufacturing processes and systems. The materials section focuses on properties and behavior. Thus, aspects of smelting and refining (or other material production processes) are presented only as they affect manufacturing and manufactured products. Refer to chapter 2 & 10

J.T Black and Ronald A.Kohser

Upon Request

10,475 KB

PMI Presentation

This Presentation gives an introduction about ,NDT PMI and Hardness Testing

N/A

Free

2,530 KB

TWI Destructive Testing

This Paper presents an Introduction to destructive tests performed on engineering materials (their types and objective)

TWI

Free

262 KB

TWI Destructive Testing Presentation

This Presentation gives an overview on the various methods used in Material Destructive Tests

TWI

Free

1,076 KB