Files
|
Type
|
Format
|
Title
|
Edition
|
Description
|
Author
|
Availability
|
Size
|
|---|---|---|---|---|---|---|---|
| S | application/pdf |
BS EN ISO 17636-2 - NDT of welds - Radiographic testing - x and Gamma ray techniques with digital detectors.pdf |
2013 |
This part of ISO 1763Q specifies fundamental techniques of digital radiography with the object of enabling! satisfactory and repeatable results to be obtained economically. The techniques are based on general recognized practice and fundamental theory of the subject. |
ISO |
Upon Request |
1,110 KB |
| S | application/pdf |
E1936-15 - Evaluating the Performance of radiographic Digitization Systems.pdf |
2015 |
This reference radiograph covers a series of test targets suitable for evaluating, quantifying, and documenting perfor-mance parameters of the radiographic digitization process or the electronic image reconstruction process, or both. This reference radiograph can be used for visual and electronic analysis of digitization systems. |
ASTM |
Upon Request |
114 KB |
| S | application/pdf |
E2339-11 - Digital Imaging and Communication in Nondestructive Evaluation.pdf |
2011 |
This practice facilitates the interoperability of NDE imaging and data acquisition equipment by specifying the image data in commonly accepted terms. |
ASTM |
Upon Request |
74 KB |
| GL | application/pdf |
IAEA - Guidelines on Training, Examination and Certification in Digital Industrial Radiology Testing.pdf |
2015 |
The German Society for Non-Destructive Testing NDT, previously, had initiated a training course on digital radioscopy (RT-S) in 1994 (level 1) followed by a level 2 training course in 1996 (— 520 certificates altogether, 2012). |
IAEA |
Upon Request |
752 KB |
| Paper | application/pdf |
Industrial X-ray Inspection - A Guide to Customized Inspection Solutions and Digital Radiography - Part1.pdf |
2017 |
X-ray inspection is a widely adapted technology for quality control of industrial products in many sectors. In particular, safety relevant parts in the aerospace, automotive, and oil and gas sectors are subject to exhaustive tests. A broad and sometimes confusing palette off international, national, and company specific quality standards and requirements has to be closely followed to pass the demanding audits. |
Lennart Schulenberg |
Upon Request |
1,513 KB |
| application/pdf |
|
|
|
|
800 KB |
||
| Paper | application/pdf |
New Compensation Principles for Enhanced Image Quality in Industrial Radiology with Digital Detector Arrays.pdf |
2011 |
Digital radiology (DR) using digital detector arrays (DDAs) has been successfully utilized in the medical industry for more than 15 years. The implementation of medical DR products in NDT had been restricted mainly due to the high image unsharpness. Most medical DR detectors require a low radiation dose for their exposure, and are therefore attractive for NDT applications from an economical point of view. |
Uwe Ewert, Klaus Bavendick, Jason Robbins, Uwe Zscherpel, Cliff Bueno, Trey Gordon, and Debasish Mishra |
Upon Request |
1,762 KB |
| Paper | application/pdf |
Portable Digital Radiography Solution for Shipyards.pdf |
NA |
Shipyards face the necessity of conducting daily tests in X-ray during the construction of the hull. This requirement however presents special challenges: The size of the hull, it's being made mainly of steel parts and the requirement of conducting mas-sive testing. This article examines the problems the MDT provider has to face when conducting tests in shipyards and how they may be resolved with a special portable digital radiography system. |
Ofra Kleinberg, Eli Dayan, Lior Pick, and Ron Pincu |
Upon Request |
979 KB |
| application/pdf |
|
|
|
|
183 KB |
||
| Paper | application/pdf |
Technical Highlights Of Digital Radiography for NDT.pdf |
2009 |
This paper provides an introduction to the Digital radiography |
Lior Pick, Ofra Kleinberg |
Upon Request |
1,029 KB |
